RPB25: How To Set Up TWS

Introduction

This article will walk you through how to easily connect two Rockville RPB25 Bluetooth speakers using TWS (True Wireless Stereo) mode. When enabled, TWS allows both speakers to play music wirelessly in stereo—one serving as the left channel and the other as the right.

These instructions are simple and require no special tools or technical knowledge—just your RPB25 speakers and a Bluetooth-enabled device (like a phone or tablet).

Step-by-Step Instructions

1. Power On Both Speakers

• Press the power button on each RPB25 speaker to turn them on.
• You will hear the prompt: "Bluetooth ready to pair."

2. Ensure No Devices Are Already Connected

• Make sure your phone or tablet is not already connected to either speaker.
• If one of the speakers is already paired to your device, hold the Play button to unpair it.

3. Activate TWS Pairing Between the Speakers

• Choose one of the speakers.
• Quickly double-press the power button on that speaker.
• You’ll hear a voice prompt say "Paired", indicating the two speakers are now linked together in TWS mode.

4. Pair Your Phone or Tablet

• Open your Bluetooth settings on your smartphone or tablet.
• Look for the device labeled RPB25 and tap it to pair.
• Once connected, you’ll hear another "Paired" voice prompt.
• Your device is now linked to both speakers via TWS.

5. Control Volume

• You can use the volume buttons on either speaker to adjust the sound for both.
• Note: The speaker volume is separate from your device’s volume.
• Start by setting your phone's volume to around 75% for optimal performance.

Troubleshooting & FAQs

Q: Why won’t my speakers connect to each other?

• Ensure both speakers are turned on and not connected to any other device.
• Try powering both off, then repeat the TWS pairing steps from the beginning.

Q: Can I use just one RPB25 speaker if I don’t want stereo?

• Yes, you can use a single RPB25 speaker by pairing it directly to your device without TWS setup.

Q: How do I disconnect the TWS link between my speakers?

• Hold down the Play button on one of the speakers until you hear: "Bluetooth unpaired."
• This will break the link between the two speakers.

Conclusion

Connecting two Rockville RPB25 speakers in TWS mode is a quick and easy way to enhance your audio experience with true stereo sound.