Introduction
The RockWedge LED is a rechargeable, wireless DMX par light designed for wall washing, DJ setups, truss mounting, and more. Available in black or white, this versatile light offers multiple control options, including DMX, sound activation, auto programs, and an IR remote.
In this guide, you’ll learn how to:
- Charge and power the light
- Use different lighting positions
- Mount it to a truss
- Navigate through modes and settings
- Control multiple lights with DMX or master/slave mode
What’s Included
- RockWedge LED light
- Lighting clamp (for truss mounting)
- Wireless IR remote
- Power cable
Step 1: Charging and Powering the Light
- Plug the power cable into the Power In port on the light.
- Plug the other end into a power outlet.
- The LED indicator will turn on, signaling that the light is charging.
- A full charge takes about 10 hours and provides up to 15 hours of battery life.
- Daisy-chain charging: Use the Power Out port to charge multiple RockWedge LEDs together.
Tip: Keep the case open while charging for proper ventilation.
Step 2: Positioning and Mounting the Light
Wall Washing (Uplighting)
- Place the RockWedge LED flush against a wall using the built-in rubber feet.
- Adjust settings to achieve the desired static color or dynamic effects.
Illuminating a Totem Stand or DJ Facade
- For Totems: Place the light inside the RTP32 or similar stands before lowering the scrim.
- For DJ Facades: Position the light behind the facade for an illuminated effect.
Truss Mounting
- Remove the nut and washers from the lighting clamp.
- Choose one of the three mounting holes on the light.
- Align the washer and bolt through the selected hole.
- Tighten the nut securely with a wrench.
- Loosen the fly bolt on the clamp and attach it to the truss bar.
- Tighten the fly bolt to secure the light in place.
Step 3: Navigating the Light’s Modes
Use the buttons under the LCD display to navigate settings:
- Menu – Cycle through different modes.
- Enter – Select and save settings.
- Up/Down – Adjust settings within each mode.
Available Modes
| Mode | Function | Adjustments |
|---|---|---|
| 10-Channel DMX (A Mode) | Full DMX control | Set DMX address |
| 6-Channel DMX (D Mode) | Basic DMX control | Set DMX address |
| CL (Static Color Mode) | Choose from 32 preset colors | Use Up/Down to select |
| CC (Color Change Mode) | Automatic color cycle | Adjust speed |
| EE (Pulse Mode) | Light pulses between colors | Adjust speed |
| FF (Color Fade Mode) | Smooth transition between colors | Adjust speed |
| ST (Strobe Mode) | Strobe effect | Adjust speed |
| SD (Sound Sensitivity Mode) | Adjust built-in mic sensitivity | Set sensitivity level |
| Sound Mode 1 | Changes color based on sound | - |
| Sound Mode 2 | Strobe effect with color change | - |
| Sound Mode 3 | Pulses with sound input | - |
| IRCL (Infrared Control Mode) | Enable/Disable IR remote | - |
| 2.4GHz Mode | Enable/Disable Wireless DMX | - |
| LED Display Mode | Turn off LCD after 20 seconds | - |
| Self-Test Mode | Runs through all colors for diagnostics | - |
Step 4: DMX Control
Wireless DMX Setup
- Set the DMX code on both the RockWedge LED and DMX controller using the Wireless DMX Code button.
- Select a color-coded DMX channel (e.g., Red for this example).
- Put the lights into 6-channel or 10-channel mode and set the DMX address (e.g., A001).
- If the controller’s code light flashes red and the lights flash green, the connection is successful.
DMX Controller Functions (10-Channel Mode)
| Fader | Function |
|---|---|
| 1 | Master brightness |
| 2 | Red intensity |
| 3 | Green intensity |
| 4 | Blue intensity |
| 5 | White intensity |
| 6 | Amber intensity |
| 7 | UV intensity |
| 8 | Strobe effect |
| 9 | Mode selection |
| 10 | Speed adjustment |
Example:
- Raising Fader 2 (Red) will increase the red LED brightness.
- Raising Fader 8 (Strobe) creates a strobe effect.
Wired DMX Setup
- Connect a DMX cable from the DMX OUT on the controller to the DMX IN of the first light.
- Daisy-chain more lights by connecting DMX OUT of the first light to DMX IN of the next.
- Set all lights to the same DMX address and mode.
- Control all lights from the DMX controller.
Step 5: Master/Slave Mode
If you want multiple RockWedge LEDs to sync without a controller, use Master/Slave mode:
Wireless Master/Slave Setup
- Select a Master Light and set its Wireless DMX Code (e.g., Red).
- Set all Slave Lights to the same DMX Code.
- The Master will flash red, and Slaves will flash green when synced.
- Use the IR remote or menu settings on the Master to control all lights.
Wired Master/Slave Setup
- Connect a DMX cable from the DMX OUT of the Master to DMX IN of the first Slave.
- Continue daisy-chaining all additional Slave lights.
- Set all lights to 6-channel or 10-channel mode with the same DMX address.
Step 6: Using the IR Remote
The wireless IR remote provides quick control for:
- Changing static colors (Red, Green, Blue, White, Amber, UV).
- Selecting modes (Auto, Strobe, Fade, Sound).
- Adjusting speed of effects.
- Turning lights on/off.
Tip: To avoid out-of-sync issues, disable infrared control on all Slave lights.
Conclusion
The RockWedge LED is a powerful, portable lighting solution perfect for DJs, event spaces, and stage productions. With multiple control options including DMX, wireless DMX, sound activation, and auto modes, you can customize your lighting setup with ease.
Whether you wall wash, mount to a truss, or sync multiple units, the RockWedge LED delivers bright, customizable lighting effects for any event.
Comments
0 comments
Article is closed for comments.