WET PAR PRO: How To Set Up w/ A DMX Controller

Introduction

Using a DMX controller with your Rockville Wet PAR Pro Outdoor Wash Lights allows for advanced lighting control, including color adjustments, strobe effects, and mode selection. In this guide, we’ll walk you through the process of connecting and configuring your DMX controller for seamless operation.

What You’ll Need

• DMX Controller
• Two or more DMX cables (preferably water-resistant for outdoor use)
• Rockville Wet PAR Pro Outdoor Wash Lights
• Wireless remote (optional for quick settings adjustments)

Step 1: Connecting the DMX Controller to Your Lights

1. Take a DMX cable and connect the male end to the DMX Out port on your DMX controller.
2. Connect the other end of the DMX cable to the DMX In port on your first light.
3. For multiple lights, take a second DMX cable:
   • Connect the male end to the DMX Out port on the first light.
   • Connect the other end to the DMX In port of the second light.
4. Repeat this process for any additional lights in your chain.

Step 2: Setting the DMX Address

To ensure all lights respond to the DMX controller, they must share the same DMX address.

Manually Setting the DMX Address

1. Enter the settings menu on each light.
2. Set the DMX address (e.g., A001).
3. Repeat this for all lights in the chain.

Using the Wireless Remote

1. Press the Slave button.
2. Use the Up and Down buttons to set the address.
3. Press Enter to save.

Step 3: Choosing the DMX Channel Mode

The DMX Channel Mode determines how much control you have over your lights.

For full functionality, we recommend using 10-Channel Mode.

How to Set the DMX Channel Mode

1. Go to the settings menu on each light.
2. Select 6-Channel or 10-Channel mode.
3. Press Enter to confirm.

💡 Pro Tip: You can also switch modes using the included remote.

Step 4: Activating the Lights on the DMX Controller

1. Turn on the DMX controller.
2. Activate Scanner 1 (or the corresponding fixture channel) to control the lights.

Step 5: Understanding DMX Controller Faders

Each fader on your DMX controller controls different light functions.

Step 6: Adjusting Effects and Modes

Using Fader 8 – Strobe Effect

• Increase fader slightly → Slow strobe effect.
• Increase fader fully → Fast strobe effect.

Using Fader 9 – Preset Modes

• Different values correspond to different lighting effects.
• Example: Setting fader between 51-100 activates Color Change Mode.

Using Fader 10 – Speed & Color Selection

• If using Color Change Mode, raising Fader 10 increases transition speed.
• If using Color Select Mode, Fader 10 chooses the exact color.

Conclusion

By following these steps, you can fully control your Rockville Wet PAR Pro Outdoor Wash Lights using a DMX controller. Whether you're adjusting colors, adding strobe effects, or synchronizing multiple lights, DMX gives you the power to create stunning lighting displays.