RPM109 V2: How To Use Effects

Introduction:
In this guide, we'll walk you through the different effects available on the RPM 109 V2 mixer. The mixer features 24 built-in DSP effects, offering a range of creative possibilities for your sound. By using the program knob, parameter knob, and the DSP main knob, you can tailor each effect to your specific needs, whether for live performances, recordings, or any other setup. Let’s dive into the different effects and how to use them!

Requirements:

• RPM 109 V2 Mixer
• Microphone or instrument
• Speakers or headphones for monitoring

Step-by-Step Instructions:

1. Understanding the Effects Controls

• Program Knob: This knob allows you to cycle through the 24 different effects built into the mixer. When you find the effect you want to use, press the knob to select it.
• Parameter Knob: This knob controls how much of the effect is applied to your sound. The higher you raise it, the more prominent the effect becomes.
• DSP Main Knob: Use this to control how the effect comes through the speakers.

2. Activating Effects on a Channel

• Select the Channel: Choose the channel you want to apply the effect to. For example, if you want the effect on your microphone (Channel 1), raise the Effects knob for Channel 1.
• Adjust the Parameter Knob: Use the Parameter knob to adjust how much of the effect is applied.
• Activate DSP: Raise the DSP Main knob to make sure the effect is coming through the speakers.

3. Cycling Through Effects

• Use the Program knob to cycle through the different effects. Once the desired effect starts flashing, press down on the knob to select it.

4. Overview of the 24 Built-In Effects

• 1. Hall: Adds a hall reverb effect.
• 2. Hall 2: Another variation of the hall reverb.
• 3. Room 1: A smaller room reverb.
• 4. Room 2: A slightly different room reverb.
• 5. Plate Reverb: A classic plate reverb.
• 6. Large Stage: Adds a stage-like reverb.
• 7. Small Stage: A reverb effect for smaller stages.
• 8. Reverb 1: A general reverb effect.
• 9. Reverb 2: A different reverb effect.
• 10. Reverb 3: A third variation of reverb.
• 11. Signal Delay: A basic delay effect.
• 12. Long Delay: A longer delay effect.
• 13. Vocal Echo: Adds an echo to vocals.
• 14. Karaoke Echo: Echo effect tailored for karaoke use.
• 15. Phaser: A phaser effect that modulates the sound.
• 16. Flanger: Creates a sweeping, jet-like sound effect.
• 17. Chorus: Adds a chorus effect to the sound.
• 18. Chorus 2: A second version of the chorus effect.
• 19. Ambient Reverb: A more ambient, atmospheric reverb.
• 20. Tremolo: A tremolo effect that modulates volume.
• 21. Wawa: A wah effect, giving a "wawa" sound.
• 22. Radio: A radio-like effect that makes the sound feel distant.
• 23. Radio Voice: A voice effect that mimics a radio broadcast.
• 24. Pitch Change: Changes the pitch of your voice. Use the Parameter knob to adjust the pitch:
  • Turn it down for a lower pitch.
  • Turn it up for a higher pitch.

5. Fine-Tuning Effects

• Parameter Knob: For effects like Pitch Change, you can adjust the pitch using the Parameter knob. Turn it all the way down for a lower pitch or up for a higher pitch.

Conclusion:
The RPM 109 V2 mixer offers a wide range of built-in effects that you can customize to suit your needs. With 24 DSP effects to choose from, including reverb, echo, delay, and more, you can enhance your sound and create unique audio experiences. Use the Program, Parameter, and DSP Main knobs to fine-tune the effects on your microphone, instrument, or any other audio source.