MINI RF3 Charge Package: How To Charge, Transport & Set Up w/ Charging Case

Introduction

The Rockville Mini RF3 Charge Package is an all-in-one lighting system that includes eight Mini RF3 wash lights, a charging case, a remote for each light, and a power cable. These lights are available in silver or black, but the setup process is the same for both. This guide will walk you through how to charge and control your Mini RF3 lights using RF remote technology, wireless DMX, and Master/Slave modes.

What's Included

• 8x Mini RF3 Wash Lights
• Charging Case
• 8x RF Remotes (one per light)
• Charging Cables
• Main Power Cable

Charging Your Mini RF3 Lights

1. Connect Each Light to a Charger
   • Take a charging cable and plug the BML end into the Mini RF3 light.
   • Plug the other end into one of the power strip outlets inside the case.
2. Tidy Up Excess Wires (Optional)
   • If the light is outside the case, tuck the excess wire into the designated slots inside the case.
   • Place the light on top of the wire for a clean and organized setup.
3. Connect the Case to Power
   • Plug the IEC end of the main power cable into the socket on the side of the case.
   • Plug the other end into a wall power outlet.
4. Turn On Charging Mode
   • Flip the power switch on the side of the case.
   • The LED indicators on the chargers will light up.
5. Monitor Charging Progress
   • The LED indicators will turn green when the lights are fully charged.

Storing and Transporting Your Lights

1. Close the Case Securely
   • Line up the grooves of the locks and twist them shut.
   • For extra security, you can attach a small padlock through the built-in lock holes.
2. Carry the Case
   • Use the handle on top to transport your lights easily.

Controlling Your Mini RF3 Lights

1. Using Wireless DMX

You can control multiple Mini RF3 lights wirelessly with a DMX controller.

Setting Up Wireless DMX Mode

1. Turn on Each Light – Hold down the power button.
2. Enable Wireless DMX or Slave Mode –
   • Double-press the power button until the group light starts flashing.
3. Set All Lights to the Same RF Group –
   • Double-press the power button to select Red, Green, Yellow, or Blue.
   • Example: Set all lights to Red.

Setting Up the DMX Controller

4. Turn on Your Wireless DMX Controller.
5. Set the Controller to the Same RF Group –
   • Example: If the lights are set to Red, set the controller to Red.
6. Activate Scanner 1 on the DMX controller.

Understanding DMX Controls

• Fader 1 – Master Dimmer (Brightness)
• Fader 2 – Red LEDs
• Fader 3 – Green LEDs
• Fader 4 – Blue LEDs
• Fader 5 – White LEDs
• Fader 6 – Amber LEDs
• Fader 7 – Ultraviolet LEDs
• Fader 8 – Strobe Speed
• Fader 9 – Preset Modes (e.g., Color Fade)
• Fader 10 – Mode Speed Control

2. Using Master/Slave Mode

This feature allows one Master light to control multiple Slave lights without a DMX controller.

Setting Up Master/Slave Mode

1. Turn on Each Light – Hold down the power button.
2. Set All Lights to Slave Mode –
   • Double-press the power button until the group light flashes.
3. Set All Lights to the Same RF Group –
   • Press the power button once to choose Red, Green, Yellow, or Blue.
   • Example: Set all lights to Red.

Choosing the Master Light

4. Select a Master Light – Pick one light to be the Master.
5. Set the Master Light to RF Mode –
   • Double-press the power button until the group light stays solid.
6. Use the RF Remote to Control the Master Light.
7. Set the Master Light to Master Mode –
   • Double-press the power button until it flashes once.
   • The Slave lights will automatically follow the Master light’s settings.

Changing Colors or Modes

• To change the mode or color:
  • Set the Master Light back to RF mode.
  • Use the RF remote to adjust colors/modes.
  • Set the Master Light back to Master mode, and the Slave lights will follow.

3. Grouping Lights for Different Effects

You can assign different Mini RF3 lights to separate RF groups and control them independently.

Setting Up RF Groups

1. Turn on Each Light.
2. Set Each Light to RF Mode –
   • Double-press the power button until the RF light stays solid.
3. Assign RF Groups –
   • Press the power button once to choose Red, Green, Yellow, or Blue.
   • Example:
     • First group: Set to Red.
     • Second group: Set to Blue.

Controlling Different Groups with the RF Remote

4. Set the Remote to a Specific RF Group –
   • Example:
     • To control the Red group, press the RF Group button until it turns Red.
     • Adjust settings for Red lights.
     • Switch the remote to Blue RF Group and adjust settings for Blue lights.

Controlling All Lights at Once

• Set the RF remote to White mode to control all groups simultaneously, no matter what RF group they are set to.

Conclusion

The Rockville Mini RF3 Charge Package is an incredibly versatile lighting system that offers wireless control, DMX compatibility, and grouping options. Whether you’re using a DMX controller, Master/Slave mode, or RF remote grouping, setting up and controlling your Mini RF3 lights is easy.