MINI RF3 Charge Package: How To Set Up Master / Slave Mode

Introduction

The Mini RF3 Charge Package lights come with a Master-Slave function, allowing multiple lights to sync and follow a designated master light. This setup is ideal for stage performances, DJ setups, and party lighting. Follow this guide to properly configure your lights for synchronized operation.

Step-by-Step Instructions

Step 1: Set Each Light to Slave Mode

1. Double press the power button on each light.
2. The group light will start flashing quickly, indicating it’s in slave mode.

Step 2: Assign the Same RF Group to All Lights

1. Press the power button once to set an RF Group color.
2. Choose from:
   • Red
   • Green
   • Yellow
   • Blue
3. Ensure all lights are set to the same RF Group (e.g., Red for this example).

Step 3: Designate a Master Light

1. Select one light to be the Master Light.
2. Double press the power button until it enters RF mode.
   • You'll know it’s in RF mode when the group light remains solid.
3. Ensure the Master Light's RF Group color matches the Slave Lights (e.g., Red).

Step 4: Set Up the Remote Control

1. Press the RF Group button on the remote.
2. Set it to the same RF Group color as your lights (e.g., Red).

Step 5: Activate the Master-Slave Mode

1. Use the remote to set the Master Light to a color or mode.
2. Double press the power button on the Master Light.
3. It will flash once, and all Slave Lights will follow the Master Light.

Changing the Mode or Color

If you want to change the effect, follow these steps:

1. Switch the Master Light back to RF mode.
2. Use the remote to select a new color or mode.
3. Double press the power button to return it to Master mode.
4. The Slave Lights will follow the new settings.

Conclusion

Setting up the Master-Slave function on the Mini RF3 Charge Package lights is quick and easy. This feature ensures a coordinated light show with minimal effort.