RVSS4AB: How To Set Up Two Speakers w/ DP Mount Attachment

Introduction

The Rockville RVSS4AB Speaker Stand supports up to 154 lbs and can be used to mount two speakers on a single stand using the Rockville DP Mount. This guide will walk you through attaching the DP Mount, mounting two speakers, and adjusting the height for the best sound coverage.

What You Need

• Rockville RVSS4AB Speaker Stand
• Rockville DP Mount (Double Speaker Mount Adapter)
• Two Speakers (with standard pole sockets)

Step-by-Step Instructions

1. Attaching the DP Mount to the Speaker Stand

1. Loosen the knob on the side of the DP Mount.
2. Align the hole on the bottom of the DP Mount with the top pole of the RVSS4AB stand.
3. Slide the DP Mount onto the stand’s pole.
4. Tighten the knob to secure the DP Mount in place.

2. Mounting Two Speakers onto the DP Mount

1. Take both speakers and align their pole sockets with the mounting poles on the DP Mount.
2. Slide each speaker onto its designated pole until they are securely in place.
3. If the speakers have tightening knobs on the bottom, turn them to lock them onto the mount securely.

3. Adjusting the Height Using Air Assist

1. Use the air-assist button on the stand to lift the speakers to the desired height.
2. Tighten the stand’s height adjustment knob to lock the position.

Conclusion

Your Rockville RVSS4AB stand is now set up to support two speakers securely using the Rockville DP Mount. This setup provides stability, easy height adjustment, and optimal sound distribution, making it ideal for DJ setups, live performances, and events.