WET PAR 50: Master/Slave Setup

Introduction

The Master-Slave function allows you to synchronize multiple Rockville WET PAR PRO 50 lights so that they all follow the same settings as the designated Master Light. This is a great feature for creating cohesive lighting effects without needing a DMX controller.

Step 1: Selecting the Master Light

1. Choose one light to act as the Master Light.
2. Press the Menu button on the Master Light until you reach the Master-Slave Mode.
3. Press Enter to select this mode.
4. Use the Up/Down buttons to find the Master setting.
5. Press Enter to confirm.

Step 2: Setting the DMX Code

To ensure proper communication between the Master and Slave lights:

1. Navigate to the U512 Menu on all lights (Master and Slaves).
2. Press Enter and choose a DMX code (U1 – U7).
3. For this example, select U1 on all lights.
4. Press Enter to save the setting.

Step 3: Configuring the Slave Lights

1. On each Slave Light, navigate to the Master-Slave Menu.
2. Press Enter and use the Up/Down buttons to select D512 (Slave Mode).
3. Press Enter again to save the setting.
4. After all Slave Lights are set, their LED indicators will turn green, while the Master Light’s LED indicator will turn red.

Step 4: Controlling the Lights

• Any color or mode changes applied to the Master Light will be automatically synchronized across all Slave Lights.
• You can use the remote control to adjust colors, brightness, and effects on the Master Light, and the Slave Lights will follow.

Conclusion

Using the Master-Slave function on the Rockville WET PAR PRO 50 lights is an easy way to achieve synchronized lighting without the need for complex DMX programming.