RVMIC4 V2: How To Set Up with A Boom Arm

Introduction

In this guide, we’ll show you how to attach a boom arm to your Rockville RVMIC 4 V2 stand. A boom arm extends the reach of your microphone, making it ideal for various setups, especially in recording or live performance environments.

Step-by-Step Instructions

Step 1: Remove the 5/8 Adapter

1. Unscrew the Adapter:
   • Start by unscrewing the 5/8 adapter on the stand. This will reveal the 3/8 threading necessary for the boom arm setup.

Step 2: Attach the Boom Arm

1. Align the Boom Arm:
   • Align the 3/8 threading on the bottom of your boom arm to the 3/8 threading on the stand.
2. Screw the Boom Arm:
   • Screw the boom arm into place securely.

Step 3: Lock the Boom Arm

1. Lock the Boom Arm:
   • If the boom arm sways or moves too much, tighten the knob towards the bottom of the arm to lock it in place.

Step 4: Adjust the Boom Arm Reach

1. Adjust the Height:
   • Use the knob on the boom arm to move it up or down to your preferred height.
2. Adjust the Reach:
   • Use the two knobs on the boom arm to adjust its reach, positioning the mic wherever needed.

Step 5: Set Up Your Microphone or Accessories

1. Attach Microphone or Accessories:
   • You can now attach either a dynamic microphone, condenser microphone, or a smartphone holder to the boom arm.
2. Wire Management:
   • Use the wire clip to keep cables organized and neat during use.

Step 6: Adjust the Stand Height

1. Adjust the Stand Height:
   • Use the hand clutch on the stand to adjust the overall height. Press down to adjust and release to lock the height in place.

Conclusion

Attaching and adjusting the boom arm to the Rockville RVMIC 4 V2 stand is simple and gives you the flexibility to extend your microphone’s reach. With the added adjustments for height and reach, as well as wire management, you can achieve a professional, organized setup.