RWM-ICE: Inputs, Outputs & Controls

Introduction

The Rockville RWM Wireless Microphone System is designed for seamless audio transmission, offering clear sound quality and reliable connectivity. This guide will walk you through the controls, inputs, and outputs of the system, as well as the step-by-step process of setting up your microphones.

Step-by-Step Setup Guide

1. Installing Batteries in the Microphones

1. Take one of the wireless microphones included in your system.
2. Locate the cap at the bottom of the microphone and unscrew it.
3. Inside, you’ll see the battery compartment.
4. Insert two AA batteries (included) with the positive (+) side facing down.
5. Screw the bottom cap back onto the microphone securely.

2. Turning On and Using the Microphones

1. Power on the microphone by holding the power button for a few seconds.
2. The display screen on the microphone will light up, showing:
   • The frequency the mic is set to.
   • The battery life indicator.
3. Muting the Microphone:
   • Quick press the power button to mute the mic.
   • The mute indicator will appear on the display.
   • Press the power button again to unmute.

3. Ensuring Frequency Sync Between Mic and Receiver

• If you aren't hearing audio from the microphone, check that the frequency on the mic matches the frequency on the receiver.
• To manually adjust the frequency:
  • Use the up and down buttons on the microphone.
• To auto-sync the mic with the receiver:
  • Use the auto-sync feature to quickly match the frequencies.

Conclusion

Your Rockville RWM Wireless Microphone System is now set up and ready to use! If you're experiencing any connection issues, check the frequency settings, battery levels, and mute status.