CAMSTAND: How To Set Up & Use

Introduction

The Rockville CamStand is a versatile stand designed to hold your camera, smartphone, tablet, monitor, or microphone, making it perfect for streaming, recording, performing, or video conferencing. This guide will walk you through assembling the stand and attaching different devices, including a webcam, Halo light, dynamic or condenser microphone, and monitor.

By the end of this setup, you’ll be able to:
✔ Assemble the CamStand properly
✔ Attach a smartphone, tablet, webcam, or monitor
✔ Install a microphone for recording or performances
✔ Use cable management for a neat setup

Step 1: Setting Up the CamStand

1. Unfold the Base:
   • Loosen the base adjustment knob and pull the stand legs downward.
   • Once fully extended, tighten the knob to secure the legs.
2. Adjust the Stand Height:
   • Loosen the height adjustment grip and extend the pole to your desired height.
   • Tighten the grip to lock it in place.

✅ Your CamStand is now stable and at the right height.

Step 2: Attaching a Smartphone or Tablet

📱 For smartphones or tablets, you’ll need the smartphone holder and holder arm.

1. Attach the Smartphone Holder to the Arm:
   • Screw the smartphone holder onto the arm mount securely.
2. Secure the Arm to the Stand:
   • Loosen the silver clamp knob on the arm.
   • Position the clamp at your preferred height on the stand.
   • Tighten the knob to lock it in place.
3. Adjust the Angle:
   • Use the arm adjustment knob to move the holder up or down.
   • Loosen the top angle knob to rotate the holder for portrait or landscape mode.
   • Tighten both knobs to lock the position.
4. Place Your Device in the Holder:
   • Clamp your smartphone or tablet securely in place.

✅ Your smartphone or tablet is now ready for streaming, video calls, or performances.

Step 3: Attaching a Webcam or Halo Light

📷 For a webcam or Halo light, you’ll need the adapter piece and ball joint.

1. Attach the Adapter Piece:
   • Screw the adapter onto the top of the stand.
2. Secure the Ball Joint:
   • Align the ball joint’s hole with the adapter’s thread.
   • Screw it on tightly.
3. Attach Your Webcam or Halo Light:
   • For a webcam: Align the threaded hole on your webcam with the ball joint and screw it in place.
   • For a Halo light: Align the bottom thread of the light with the ball joint and screw it in.
4. Adjust the Angle:
   • Loosen the ball joint knob to position the webcam or light.
   • Once set, tighten the knob to lock it in place.

✅ Your webcam or lighting setup is now secure and ready to use.

Step 4: Cable Management

To keep your setup clean and organized, use the wire management clip.

1. Run all cables along the stand’s pole.
2. Secure them into the wire management clip to prevent tangling.

✅ This step ensures a neat and professional look.

Step 5: Attaching a Microphone

🎤 You can attach either a dynamic or condenser microphone.

For a Dynamic Microphone

1. Remove the ball joint adapter from the top of the stand.
2. Attach the microphone clip by screwing it onto the stand.
3. Insert your dynamic microphone into the clip.
4. Connect the XLR cable to the microphone.
5. Run the cable through the wire management clip.

For a Condenser Microphone

1. Remove the adapter piece inside the shock mount (if needed).
2. Screw the shock mount onto the stand.
3. Loosen the shock mount knob to angle the mic.
4. Insert the condenser microphone into the mount by pinching the arms.
5. Attach a pop filter to reduce plosive sounds:
   • Loosen the pop filter clamp and attach it to the stand.
   • Adjust it to be right in front of the microphone.
6. Connect the XLR cable and run it through the cable clip.

✅ Your microphone is now set up for recording, performances, or streaming.

Step 6: Attaching a Monitor

For an advanced setup, attach a monitor to the stand.

1. Ensure the smartphone holder is turned sideways.
2. Clamp the monitor into the holder securely.
3. Connect the monitor to your laptop or PC.
4. Adjust the stand height and position for the best viewing angle.

✅ This setup allows you to read comments, lyrics, or scripts while streaming.

Conclusion

🎥 You’ve now fully set up your Rockville CamStand! 🎥

With this setup, you can:
✅ Mount a smartphone, tablet, or monitor for streaming
✅ Use a webcam or Halo light for video recording
✅ Attach a dynamic or condenser microphone for professional audio
✅ Manage cables for a clean and organized setup