CAMSTAND: How To Set Up A Microphone

Introduction

The Rockville CamStand allows you to attach a microphone and a smartphone, tablet, or monitor simultaneously, making it an excellent option for recording, streaming, performances, and live gigs. Whether you're using a dynamic microphone for a performance or a condenser microphone for a studio setup, this guide will walk you through the step-by-step installation.

What’s Included

✔ CamStand
✔ Microphone Clip (for Dynamic Microphones)
✔ Shock Mount (for Condenser Microphones)
✔ Wire Management Clip
✔ Pop Filter (optional for Condenser Microphones)

Step 1: Removing the Existing Adapter

Before attaching your microphone:

1. If there is an adapter or ball joint on top of the stand, unscrew and remove it.
2. This leaves the standard mic threading exposed, ready for a mic clip or shock mount.

✅ Tip: Removing the adapter ensures a secure connection for the microphone holder.

Step 2: Attaching a Dynamic Microphone

A dynamic microphone is a great option for live performances, podcasts, and general recording.

Installing the Mic Clip

1. Take the dynamic microphone clip and screw it onto the stand’s threading.
2. Insert the dynamic microphone into the clip.

Connecting the XLR Cable

1. Plug an XLR cable into the microphone.
2. Run the cable along the stand, securing it using the wire management clip.

Attaching a Tablet or Smartphone

• If using a tablet for lyrics or a teleprompter, rotate the holder sideways to fit the tablet better.
• Adjust the stand’s height and angle to achieve a comfortable position.

✅ Tip: This setup is perfect for singers, speakers, and performers who need to read lyrics, notes, or scripts while using a microphone.

Step 3: Attaching a Condenser Microphone

A condenser microphone is ideal for studio recording, streaming, or high-quality vocal performances.

Installing the Shock Mount

1. Take the shock mount and check if an adapter is inside the threading.
   • If an adapter is present, unscrew and remove it so it fits the CamStand.
2. Screw the shock mount onto the stand and tighten it securely.
3. Loosen the knob on the shock mount to angle the microphone downward for proper positioning.
4. Pinch the shock mount’s arms, insert the condenser microphone, and release to secure it in place.

Using a Pop Filter (Optional)

1. Attach the pop filter clamp to the stand.
2. Adjust the arm so the filter is directly in front of the microphone.

✅ Tip: A pop filter reduces plosive sounds (P, T, K sounds) for cleaner vocal recordings.

Connecting the XLR Cable

1. Plug the XLR cable into the condenser microphone.
2. Use the wire management clip to keep cables organized.

Step 4: Final Adjustments

• Adjust the stand’s height and reach for an ergonomic setup.
• Make sure all screws and mounts are secure to avoid movement during use.
• If using a tablet or phone for lyrics or streaming, ensure it's positioned for easy viewing.

Conclusion

By following these steps, you can easily set up a dynamic or condenser microphone with your Rockville CamStand. Whether you’re recording vocals, live streaming, performing on stage, or reading lyrics, this setup provides flexibility and convenience.

Key Takeaways:

✔ Remove any existing adapter before attaching a mic clip or shock mount.
✔ Use the correct holder—mic clip for dynamic microphones, shock mount for condenser microphones.
✔ Secure and organize your microphone cable using the wire management clip.
✔ Attach a pop filter for condenser microphones to improve sound quality.
✔ Adjust the height, reach, and angle for an optimal setup.