RDR3U: How To Set Up & Use

Introduction

The Rockville RDR3U Rack Drawer is a lockable storage solution designed for studio desks, portable rack bags, and travel cases. This guide will walk you through the step-by-step installation process for each of these setups.

What’s Included

• Rockville RDR3U Rack Drawer
• Two Sets of Keys (for securing the drawer)
• Mounting Hardware (varies by setup)
• Optional Rubber Feet (for additional stability when necessary)

Step-by-Step Installation for Different Setups

1. Installing the Drawer in a Studio Desk Rack

Check for 3U Rack Space

• Look for three blank spaces in your studio desk rack to ensure enough room.
• To confirm 3U spacing, count:
  • First hole + blank space + second hole = 1U
  • Repeat the pattern three times to reach 3U.

Install M6 Cage Nuts

1. Insert M6 cage nuts into the mounting holes.
2. Use pliers to squeeze the lips for easier fitting.
3. Alternatively, use a flathead screwdriver to push them into place.

Mount the Drawer

1. Lock the drawer to prevent it from opening during installation.
2. Align the rack ears of the drawer with the cage nuts.
3. Insert M6 screws into the holes and tighten them using a screwdriver.

Unlock & Use the Drawer

• Use the key to unlock the drawer.
• Store your equipment securely.

2. Installing the Drawer in a Portable Rack Bag

Check for 3U Rack Space

• The Rockville RB35 Portable Rack Bag or similar models are pre-fitted with screw holes, eliminating the need for cage nuts.

Mount the Drawer

1. Lock the drawer before installation.
2. Align the rack ears of the drawer with the pre-drilled screw holes in the bag.
3. Insert the included screws and tighten them securely.

Unlock & Use the Drawer

• Unlock the drawer using the key.
• Store items securely and zip up the bag for easy transport.

3. Installing the Drawer in a Travel Case

Check for 3U Rack Space

• Count three blank spaces in your travel case’s rack system.
• If placing the drawer in the middle or lower sections, count seven holes total between the first and last mounting points.

Install M6 Cage Nuts

1. Insert M6 cage nuts into the mounting holes.
2. Use pliers to squeeze the lips together for easier fitting.
3. Alternatively, use a flathead screwdriver to push them into place.

Mount the Drawer

1. Lock the drawer before installation.
2. Tip the case on its back for easier installation.
3. Remove the top lid of the case if necessary.
4. Align the rack ears of the drawer with the installed cage nuts.
5. Insert the M6 screws into the holes and tighten securely.

Unlock & Use the Drawer

• Unlock the drawer and store your items securely.
• Reattach the travel case lid and secure the case for transport.

Removing the Drawer

If you need to remove the drawer:

1. Unscrew the four mounting screws.
2. Carefully slide the drawer out of the rack space.
3. Store it safely or transfer it to another rack.

Conclusion

Installing the Rockville RDR3U Rack Drawer in a studio desk, portable rack bag, or travel case is a straightforward process that provides secure storage for your gear. Following these step-by-step instructions will ensure a stable and functional setup.