RDR3U: How To Set Up In A Travel Case

Introduction

The Rockville RDR3U Rack Drawer is designed for secure storage in travel cases, making it ideal for transporting gear safely. This guide will walk you through the step-by-step installation process, ensuring a proper fit and secure mounting of the drawer in your travel case.

What You’ll Need

Before getting started, ensure you have the following:

• Rockville RDR3U Rack Drawer
• Travel case with a 3U rack space
• M6 Cage Nuts (for securing the drawer)
• M6 Screws (for attaching the drawer to the case)
• Pliers (for inserting cage nuts)
• Flathead Screwdriver (optional for securing cage nuts)
• Phillips Head Screwdriver (for tightening screws)

Step-by-Step Installation

1. Check for 3U Rack Space

Before installing the drawer, confirm that your travel case has enough space for a 3U unit:

1. Locate the rack mounting spaces inside your case.
2. Count the spaces between the screw holes:
   • 1U = Three holes
   • 2U = Six holes
   • 3U = Nine holes
3. Ensure you have at least 3U of space available for the Rockville RDR3U drawer.

2. Install the M6 Cage Nuts

1. Take an M6 cage nut and locate the lips on the sides.
2. Use pliers to squeeze the lips slightly for easier installation.
3. Insert one side of the cage nut into the hole and push it in until it clicks into place.
4. Alternatively, use a flathead screwdriver to secure the other side of the nut into the hole.
5. Repeat for all four mounting points where the drawer will be attached.

3. Insert the Rack Drawer

1. Lock the drawer using the included key before inserting it—this prevents it from sliding open during installation.
2. Tilt the travel case on its back for easier installation.
3. Remove the top lid of the case for unobstructed access.
4. Align the rack ears of the drawer with the installed M6 cage nuts.
5. Carefully slide the drawer into the rack space, ensuring that it moves smoothly into position.
   • If needed, adjust the positioning slightly to ensure proper alignment.

4. Secure the Drawer

1. Take four M6 screws and insert them into the aligned holes on the rack ears.
2. Use a Phillips head screwdriver to tighten the screws and secure the drawer in place.
3. Ensure the drawer is firmly mounted and does not move.

5. Unlock and Use the Drawer

1. Use the key to unlock the drawer.
2. Pull out the drawer and place your items inside.
3. When not in use, lock the drawer for security.

Removing the Drawer

If you need to remove the drawer:

1. Unscrew the four mounting screws.
2. Carefully slide the drawer out of the rack space.
3. Store it safely or transfer it to another rack.

Conclusion

Installing the Rockville RDR3U Rack Drawer in a travel case is a simple process that ensures secure storage for your gear. Following these step-by-step instructions will provide a stable and functional storage solution for on-the-go use.