RFSSB: How To Assemble Steel Frame DJ Event Facade

Introduction

The Rockville RFSSB Facade is a sleek and portable solution for DJs and event professionals. It comes with a pre-assembled frame, scrims, and a carrying bag for easy transport. This guide will walk you through the process of assembling and packing your RFSSB Facade.

1. Assembling the Rockville RFSSB Facade

Step 1: Position the Facade Frame

1. Start by standing the frame on its feet.
   • Feet: The feet on the frame help you identify the bottom of the facade. The top side of the frame has no feet.

Step 2: Level the Facade

1. If you are setting the facade on an uneven surface, twist the feet to level it out. This is helpful for wood, carpet, or other uneven surfaces.

Step 3: Attach the Scrims

1. The frame is pre-assembled, so all you need to do is spread out each panel.
2. On the inside of the frame, you’ll see Velcro. This is where you will attach the scrims.
   • Align the Velcro on the scrim with the Velcro on the frame.
   • Start by lining up the top of the scrim with the top of the frame.
   • Stretch the scrim down the panel, making sure it’s aligned properly.
3. Repeat this process with the remaining scrims and panels.

Step 4: Shaping the Facade

1. Once all the scrims are in place, you can shape the facade to suit your setup.
   • Jagged Setup: You can arrange the panels at various angles to create a dynamic look.
   • Traditional DJ Setup: Position the two front panels flat, then bring in the side panels for a clean and traditional design.

2. Packing Up the Rockville RFSSB Facade

Step 1: Prepare for Packing

1. To pack up, begin by bringing in each panel towards the center, just like folding it in.
2. Make sure to keep the scrims attached if you prefer. If not, you can remove the scrims before packing.

Step 2: Fold and Store in the Bag

1. Open the carrying bag by unzipping it.
2. Place the folded facade into the bag, aligning it with the inside edges of the bag.
3. Ensure each corner of the facade is neatly tucked into the bag.

Step 3: Close the Bag

1. Zip up the bag to securely store the facade.
2. The bottom of the bag has feet, which helps prevent it from slipping when stored.

Step 4: Carrying the Bag

1. Use the handles on the bag to carry it to your next gig or event.
2. The bag also has Velcro straps in the middle for a more secure grip. Simply velcro the straps together for easy lifting.

Conclusion

The Rockville RFSSB Facade is designed for quick assembly and easy transport. By following the steps outlined above, you can set up the facade in minutes and pack it away just as efficiently. Whether you’re heading to your next gig or storing it for later, this facade will make your setup process a breeze.