RFSSW: How To Light Steel Frame DJ Event Facade

Introduction

After setting up your Rockville RFSSW Facade, you can elevate the visual experience by adding lighting. This guide will show you how to light up your RFSSW Facade using PAR lights or strip lights for a bright, dynamic effect.

1. Setting Up Lights for the RFSSW Facade

Step 1: Select Your Lights

1. Use PAR Lights or Strip Lights:
   • Choose PAR lights or strip lights that fit behind the facade. For today’s demo, we’ll use four PAR lights, one for each panel.

Step 2: Wall Washing Technique

1. Position the Lights:
   • Place the light close to the panel, shining upwards to illuminate each panel.
   • This wall-washing technique creates an evenly lit effect across each panel.
2. Adjust the Position:
   • If your lights have legs or mounting brackets, you can angle the lights as needed.
   • Position the light a few inches away from the panel, then adjust the angle to achieve the desired effect on the facade.

Step 3: Add More Lights for More Illumination

1. Use Multiple Lights:
   • The more lights you use, the more vibrant the facade will be.
   • With four lights set up to each panel, the facade will be fully illuminated.

Step 4: Using Strip Lights

1. Set Up Strip Lights:
   • If you’re using strip lights, follow the same steps.
   • Make sure there’s enough space behind the facade for the strip lights to fit properly.
   • You can still use the wall washing technique or place the strip lights a few inches away and angle them.

Conclusion

Lighting up the RFSSW Facade is easy with PAR lights or strip lights. Use multiple lights and position them well to create an illuminated setup that will stand out. Whether you go with wall washing or angled positioning, you’ll achieve a dynamic lighting effect.