R-BOOM 34: How To Attach A Phone or Tablet – Rockville Audio

Introduction:

This article will guide you step-by-step through easily attaching your smartphone or tablet to the Rockville R BOOM 34 microphone boom arm using the iStand holder. The setup is straightforward and requires no technical expertise.

Required Items:

Rockville R Boom 34 Boom Arm
Smartphone or tablet
Rockville iStand holder attachment (sold separately)

Step-by-Step Instructions:

Step 1: Attach the iStand Holder to Your R Boom 34

Take your iStand holder and locate the threaded attachment point.
Securely screw the provided adapter onto the iStand holder.
Tighten the attachment firmly to ensure stability.

Step 2: Connect the iStand to the Boom Arm

Align the iStand holder with the threaded end of the R Boom 34 Boom Arm.
Turn the iStand holder clockwise onto the boom arm until fully tightened; careful not too overtighten.

Step 2: Mount Your Smartphone or Tablet

Gently place your smartphone or tablet into the adjustable clamps of the iStand holder.
Adjust the clamps until your device is held securely.

Step 3: Adjusting Your Device’s Position

Use the adjustable knobs on the R Boom 34 Boom Arm to position your smartphone or tablet at your desired angle and height.
Tighten all adjustment points securely to maintain the position.

Step 3: Charging Your Device (Optional)

If you need to charge your smartphone or tablet during use, you can easily run your charging cable along the boom arm.
Connect your charging cable to your device.
Secure the cable along the arm for neat cable management.

Troubleshooting & FAQs:

Q: My smartphone/tablet doesn’t fit securely in the holder. What should I do?

Ensure the clamps of the iStand holder are fully adjusted to match your device’s size securely.

Q: How do I keep the boom arm from drooping or moving during use?

Make sure the three adjustment knobs on the boom arm and single adjustment knob on the iStand holder are tightly secured.

Q: Can I rotate or reposition my device easily during use?

Yes, simply loosen the clamps slightly, reposition your device, and retighten the clamps.

Conclusion:

You have successfully attached your smartphone or tablet to your Rockville R Boom 34 Boom Arm and iStand holder, making it perfect for live streaming, recording, or content creation.