RVSS13: How To Set Up & Use

Introduction: In this guide, we’ll walk you through how to set up your Rockville RVSS13 speaker stand, a versatile piece of equipment designed for both speakers and lighting trees. Whether you’re preparing for a gig or event, this stand allows you to securely mount your speakers and lighting with ease. We'll also cover how to adjust its height, use the air assist lowering system, and pack it up for transport.

Step-by-Step Instructions:

1. Unboxing the RVSS13 Speaker Stand

• The kit includes:
  • Speaker Stand (RVSS13)
  • Carry Bag for easy transport
  • Manual for setup reminders

2. Setting Up the Legs

• Start by loosening the knob on the base of the stand.
• Spread the legs of the stand by pulling them outwards. You can also push down on the base to help spread the legs further.
• Once the legs are in place, tighten the knob to lock them securely.

3. Attaching the Speaker

• The RVSS13 stand is compatible with any speaker that has a 35mm pole mount socket.
• Align the socket on your speaker with the pole mount at the top of the stand.
• Slide the speaker onto the pole mount, and if your speaker has a tightening knob, be sure to tighten it to secure the speaker.

4. Adjusting the Height

• To adjust the height, loosen the knob on the pole.
• Pull the pole up to your desired height. As you pull, you will hear the auto-lock system engage.
• Once you reach the desired height, tighten the knob to lock it in place.

5. Using the Air Assist Lowering System

• To lower the stand, loosen the knob and press the button located on the front of the stand.
• Press the button once to lower the stand by one notch.
• Hold the button to lower the stand all the way down.
• This feature makes it easy and smooth to adjust the height during setup or breakdown.

6. Setting Up a Lighting Tree

• The RVSS13 is also compatible with lighting trees that feature a 35mm pole mount socket.
• Loosen the knob on the base of the lighting tree.
• Align the lighting tree with the pole mount on the stand and slide it on.
• Tighten the knob to secure the lighting tree.
• You can then adjust the height of the lighting tree in the same way you adjusted the speaker stand.

7. Packing Up the Stand

• To prepare the stand for transport, lower the top pole all the way down.
• Tighten the knob to ensure the pole is secure.
• Loosen the base knob to retract the legs of the stand and push the legs inward.
• Tighten the knob again to lock the legs in place.
• Place the stand in the included carry bag.
  • Use the velcro straps inside the bag to secure the stand. The longer velcro strap is meant to secure the legs or bottom of the stand.
  • Zip up the bag once the stand is in place.

Conclusion:

Setting up and packing down your Rockville RVSS13 speaker stand is easy and quick. Whether you are mounting speakers or lighting, adjusting the height or utilizing the air assist lowering system, this stand is built for efficiency.