RVSS13: How To Set Up a Lighting Tree

Introduction

The Rockville RVSS13 Speaker Stand is not just for speakers—it also allows you to mount a lighting tree if your lighting fixture has a 35mm pole mount socket. This guide will walk you through how to attach, adjust, and remove your lighting tree using the RVSS13 stand.

Step 1: Attaching the Lighting Tree to the Stand

1. Loosen the knob at the bottom of the lighting tree to prepare it for mounting.
2. Align the bottom of the lighting tree with the top of the RVSS13 stand.
3. Slide the lighting tree onto the top of the stand until it sits securely.
4. Tighten the knob at the bottom of the tree to lock it in place.

Step 2: Adjusting the Stand Height

1. Loosen the front knob on the stand to unlock the height adjustment.
2. Pull up on the stand while listening for the clicks of the Auto-Lock system.
3. Once you reach your desired height, tighten the front knob to secure it.

Step 3: Lowering the Stand with the Air Assist Function

1. Loosen the front knob to unlock the height adjustment.
2. Press the air assist button:
   • Press once to lower the stand one notch.
   • Hold the button to fully lower the stand.
3. Once lowered, tighten the knob to secure the stand.

Step 4: Removing the Lighting Tree

1. Take all lights off the lighting tree before removing it.
2. Loosen the side knob on the lighting tree.
3. Lift the lighting tree off the stand and store it safely.

Conclusion

Mounting a lighting tree on the Rockville RVSS13 stand is quick and simple. The Auto-Lock and Air Assist features allow for easy height adjustments, making it an excellent choice for DJs, bands, and event setups.