BATTERY PAR PACK 6RF: How To Use Charging Case

Introduction

The Battery Par Pack 6RF Rechargeable Transport Case is designed to charge, protect, and transport your Battery Par 6RF wash lights easily. This guide will walk you through setting up the case, stacking multiple cases, securing your lights, and properly charging them for your next event. The transport case allows you to charge all lights at once and provides durability and easy mobility for gig-to-gig use.

What’s Included:

• 8 Battery Par 6RF Wash Lights (available in black or white)
• Dual Bracket for each light (to mount or angle)
• Wireless RF Remote for each light
• Power Cable for each light
• Main Power Cable for the case
• Built-In Power Strip

Setup Guide

A.) Understanding the Case Features

The case is designed for easy transport and stacking, making it ideal for professionals moving from gig to gig.

Foot Locking Brakes:

• Located on the front and back corners of the case.
• Before loading / unloading lights, press down on the locking brakes with your foot to prevent rolling.
• To move the case again, simply release the brakes with your foot.

Stackable Design:

• If you have more than one Battery Par Pack 6RF case, they can be stacked for efficient storage and transport.
  1. To stack, lock the wheels of each case first.
  2. Then align the top case wheels with the grooves of the bottom case.
  3. To move both stacked cases, unlock the bottom case wheels and roll freely.

Security Features:

• The case features butterfly locks to securely close the lid.
• For extra security, you can use a padlock through the designated holes on the side.
• Handles are located on both sides for safer stacking and transportation.

B.) Charging Your Battery Par 6RF Lights

⚠️ Important Note: Always keep the case open while charging.

• The lights have powerful batteries, and leaving the case open allows proper ventilation to prevent overheating.
• Check the power strip connections to make sure all lights are charging properly.

Connecting Each Light:

1. Take the power cable for each light.
2. Plug the female end into the power input socket on the light.
3. Plug the other end into one of the outlets on the center strip inside the case.

Connecting the Case:

1. Take the main power cable and plug the female end into the side socket of the case.
2. Plug the male end into a wall outlet.
3. Flip the power switch on the case to start charging.

Charging Time:

• If completely dead, lights take about 5 hours to fully charge.
• Once fully charged, the Battery Par 6RFs can run for up to 15 hours.
  • Using lower frequency static colors (e.g. red / green) will drain the battery much slower.
  • Using higher frequency static colors (e.g. violet / white) and color-changing modes will drain the battery much faster.

C.) Using Extra Space for Storage 

If you are not using all 8 lights for a show, the extra slots in the case can be used for storing:

• Cables and Wires
• Microphones
• Additional Accessories

This keeps all your lighting gear organized in one place.

FAQs

Q: Why do I need to keep the case open while charging?

• The batteries generate heat, and keeping the case open ensures proper ventilation.

Q: How do I know if my lights are charging?

• Ensure the power cables are properly connected to the power strip.
• After flipping the power switch, check if the lights show charging indicators.

Q: Can I transport the case with the lights plugged in?

• No, always unplug the lights before moving the case to avoid damage.

Q: How do I secure my case when leaving it unattended?

• Use a padlock through the built-in lock holes on the butterfly latches.

Conclusion

The Battery Par Pack 6RF Rechargeable Transport Case makes it simple to charge, store, and transport your lights efficiently. With stacking, security locks, and built-in charging, this case is the ultimate solution for event professionals and mobile DJs.