RAM-PRO15: How To Set Up & Use

Introduction

The Rockville REM Pro 15 is a 15-inch battery-powered PA speaker designed for portability and versatility. It features built-in wheels and a trolley handle, multiple input options, wireless microphone support, Bluetooth connectivity, and True Wireless Stereo (TWS) pairing. This guide will walk you through setup, connectivity, and additional features.

What’s Included

• REM Pro 15 Speaker
• Two Wireless Microphones (with batteries)
• Wireless Remote (with AAA batteries)
• Power Cable
• Built-in Handles & Wheels for portability
• 35mm Pole Mount Socket for stand mounting

Step 1: Powering the Speaker

The speaker can be powered and charged in two ways:

A. Using the Included Power Cable

1. Plug the power cable into the AC input on the back of the speaker.
2. Connect the other end to a power outlet.

B. Using 12V External Battery Terminals

• The speaker features 12V battery terminals for direct power or external charging.

1. Charging the Speaker via 12V Battery:
   • Connect the 12V positive lead to the "IN" terminal.
   • Connect the ground lead to the "COM" terminal.
2. Powering Another Device Using the Speaker's Battery:
   • Keep the ground wire in the "COM" terminal.
   • Connect a positive lead to the "OUT" terminal.
   • Plug the other end into the device you want to power.

Checking Battery Level

• The battery level indicators on the speaker show current power status.

Step 2: Using the Built-In Wireless Microphones

1. Install batteries in the microphones.
2. Raise the "Wireless Mic Level" knob on the speaker.
3. Turn on a microphone and speak into it.
   • The audio should come through the speaker.

Activating Wireless Mic Priority Mode

• The "Wireless Mic Priority" button lowers music volume when you speak into a microphone.
  • To activate, press the button down.
  • This is useful for announcements and events.

Step 3: Connecting Wired Microphones

The speaker has two microphone inputs that support XLR or ¼” (6.35mm) cables.

1. Plug a wired microphone into Mic Input 1 or Mic Input 2.
2. Raise the corresponding mic level knob.
3. Turn on the microphone and speak.

Step 4: Connecting External Audio Sources

The REM Pro 15 supports multiple audio connections.

A. Connecting an External Mixer or Speaker

• XLR Line Input: Connect mixers, DJ controllers, or audio interfaces.
• XLR Line Output: Send audio to subwoofers, powered speakers, or another PA system.

1. Use an XLR cable to connect the output of your external device to the Line In.
2. Raise the "Line Level" knob to hear the connected source.

B. Connecting an MP3 Player or Other Audio Source

• RCA Inputs allow connections from:
  • MP3 players
  • Turntables (with a preamp)
  • Mixers

1. Plug in your RCA cables from the audio source.
2. Raise the "Line Level" knob.

Step 5: Adjusting the Sound

The built-in EQ section lets you fine-tune the sound.

• Adjust frequencies from 100Hz to 10kHz.
• Boost or cut frequencies to customize your sound.

Step 6: Enabling LED Lights

• The speaker has built-in LED lights that can be toggled on/off.
• Press the LED button on the back panel to activate or deactivate.

Step 7: Bluetooth & TWS (True Wireless Stereo) Pairing

The REM Pro 15 can connect via Bluetooth for wireless music playback.

A. Pairing a Single Speaker

1. Press the "Mode" button to switch to Bluetooth.
2. On your smartphone or tablet, go to Bluetooth settings.
3. Select “Bluetooth” (REM Pro 15 should appear).
4. Tap to pair.

B. Pairing Two Speakers in TWS Mode

TWS allows two speakers to sync wirelessly for stereo sound.

1. Set both speakers to Bluetooth mode.
2. On one speaker (Master), hold the "TWS" button.
3. The second speaker (Slave) will display "TWS Slave".
4. Pair your Bluetooth device to the Master speaker.
5. Raise the MP3 level knobs on both speakers.

Now your music will play in stereo across both speakers.

Step 8: Using the USB & SD Card Inputs

• The USB and SD card slots allow direct playback of MP3 files.

1. Insert a USB drive or SD card with MP3 files.
2. Use the control buttons below the display to play, pause, or skip tracks.

Step 9: Connecting a Mixer for a Larger Setup

To expand your setup, you can connect a mixer to two REM Pro 15 speakers.

1. Use two XLR cables.
2. Connect the female XLR ends to the mixer’s main mix output.
3. Plug the male ends into the XLR Line Inputs of each speaker.
4. Raise the Line Level knob on each speaker.

Testing the Setup

1. Plug in a microphone to Channel 1 of the mixer.
2. Raise the gain and level knob for that channel.
3. Raise the "Main Mix" knob on the mixer.
4. Speak into the microphone – your voice should be heard through both speakers.

Conclusion

The Rockville REM Pro 15 PA Speaker is a versatile, portable, and powerful system designed for live performances, DJs, public speaking, and event audio. With multiple inputs, wireless microphones, Bluetooth connectivity, and TWS pairing, it offers flexibility for any setup.