RAM-PRO15: How To Set Up with a Mixer

Introduction

Setting up a passive mixer with your Rockville REM Pro 15 speakers allows you to connect multiple microphones, instruments, and audio sources for a professional audio setup. This guide will walk you through connecting a mixer to two REM Pro 15 speakers, adjusting levels, and ensuring optimal sound.

What You’ll Need

• Two Rockville REM Pro 15 speakers
• Passive mixer
• Two XLR cables
• Microphones, instruments, or other audio sources (optional)

Step 1: Connecting the Mixer to the Speakers

1. Take two XLR cables.
2. Plug the female ends of the XLR cables into the Main Mix Output on the mixer.
3. Plug the male ends into the XLR Line Input on each REM Pro 15 speaker.
4. Raise the "Line Level" knob on each speaker to enable audio from the mixer.

Step 2: Connecting a Microphone

1. Plug a microphone into Channel 1 on the mixer.
2. Raise the Gain knob for Channel 1.
3. Adjust the Level knob for that channel.

Step 3: Adjusting the Sound

1. Increase the "Main Mix" knob on the mixer to send the signal to the speakers.
2. Test the microphone by speaking into it.
   • You should hear your voice coming through both REM Pro 15 speakers.
3. Fine-tune the sound using the mixer's EQ and volume controls.

Step 4: Expanding the Setup

• Connect additional microphones and instruments through the mixer.
• Adjust individual channel levels to create a balanced sound mix.

Conclusion

By following these steps, you can easily set up a passive mixer with your Rockville REM Pro 15 speakers for live performances, DJ setups, or events. This allows for greater control over multiple audio sources while maintaining professional sound quality.