ROCK SABER: How To Set Up, Mount & Control

Introduction:

This guide will walk you through the complete setup and operation of your Rockville Rock Saber LED light, including mounting options, control modes, and DMX/app configurations. Whether you have the black or white version, the setup process is identical. The instructions are beginner-friendly and no technical expertise is required.

What You’ll Need:

• Rockville Rock Saber light (black or white)
• Charger (two-piece: adapter + power cord)
• Mini stand
• Allen key
• Hanging ring
• Optional end cap for sound mode
• Wireless remote
• DMX guide (included)
• Saber Stand X1 (optional for tall mounting)

Step-by-Step Instructions:

1. Unboxing and Included Accessories

Your Rock Saber package includes:

• LED Light
• Power adapter and cord
• Mini tripod stand
• Allen key
• End cap for improved sound pickup
• Hanging ring
• Wireless remote control
• DMX guide

2. Mounting Options
The Rock Saber has a 1/4" diameter, 20 TPI(coarse) screw threading used for attaching either the Mini Stand, Hanging Ring or X1 Stand.

A. Using the Mini Stand

1. Locate the threaded hole on the bottom of the light.
2. Screw the mini stand into the threading.
3. Spread the tripod legs for stability.
4. Use the Allen key to fine-tune the leg tension and angle.

B. Hanging the Light w/ Included Ring

1. Screw the included ring into either the top or bottom threaded hole.
2. Use the ring to hang the light from a hook or truss.

C. Mounting to the Saber Stand X1 (Taller Stand)

1. Remove the screw from the base plate and align it with the middle pole.
2. Insert and align the screw's flat sides with the stand base.
3. Attach the main pole to the base and screw tightly.
4. (Optional) Extend the pole height using the adjustment knob.
5. Mount the light by threading it onto the top of the stand.

3. Powering On and Basic Controls

• Press the silver power button to turn the light on.
• Use the Menu, Enter, Up, and Down buttons to navigate.

4. Control Modes Overview

A. DMX Address Mode

• Set address between 001–512.
• Navigate with Up/Down; press Enter to save.

B. Channel Mode

• Choose between 7 DMX channel profiles.
• Adjust using Up/Down and press Enter to select.

C. DMX Fail Mode

• Options:
  • Hold: Light freezes on last setting.
  • Blackout: Light turns off if signal is lost.

D. Manual (Custom Color) Mode

• Adjust RGBWY (Red, Green, Blue, White, Yellow) intensity.
• Add optional strobe effect.

E. Program Mode

• Options include:
  • Lee Color
  • Regular Color
  • Auto Mode
  • Sound Mode
  • Wi-Fi Mode for app syncing
• Use Enter to adjust each mode’s brightness, color, and strobe settings.

F. Wi-Fi App Mode

• Navigate to Wi-Fi mode and note the displayed code.
• On your phone, connect to the matching Wi-Fi network.
• Control the light via the DJ Link Light app.

5. Sound Mode Setup

1. Remove the pre-installed cap if it blocks the microphone.
2. Attach the alternative cap with mic holes.
3. In Sound Mode:
   • Choose from 31 different sound responses.
   • Adjust sensitivity (1–9).
   • Set a color: Rainbow or 1 of 27 static colors.

6. Auto Mode

• Select from multiple automated programs.
• Adjust:
  • Speed (faster/slower transitions)
  • Color (rainbow or static)

7. HSI Mode

• Control:
  • Hue
  • Saturation
  • Dimmer/Intensity

8. Color Temperature Mode

• Adjust color temperature from cool (6500K) to warm (3000K).
• Includes brightness and strobe control.

9. Master/Slave Mode

• Set one light as Master (ON) to control others.
• Set the rest to Slave (OFF).

10. Wireless DMX Group ID

• Choose from 7 color-coded groups (e.g., Red, Green, Blue, etc.).
• Ensure all lights and controller share the same ID.

11. Brightness Mode

• Choose from brightness profiles like:
  • 4 Hours (maximum brightness)
  • 23 Hours (energy-saving)

12. IR (Infrared Remote) Mode

• ON: Enables remote use.
• OFF: Disables remote (useful in Master/Slave setups).

13. Menu Lock

• Prevent accidental setting changes.
• A lock icon will appear when active.
• Hold Menu to unlock.

14. Backlight Timeout

• Choose how long the display stays lit:
  • 10, 20, 30 seconds, or always ON.

15. Factory Reset

• Resets all settings to default.

Wireless DMX Setup for Two Rock Sabers

1. Turn ON both Rock Sabers and your wireless DMX controller.
2. Disable Master Mode on both lights.
3. Set all devices (both lights + controller) to the same Wireless DMX Group ID (e.g., ID 4 - Blue).
4. Use the same DMX address and channel mode across lights.

Troubleshooting & FAQs

Q: My remote isn’t working. What should I check?
A: Ensure IR mode is set to ON in the light’s settings.

Q: Lights are out of sync in Master/Slave mode.
A: Confirm only one light is set to Master and all others are set to Slave.

Q: App won’t connect to light.
A: Ensure your phone is connected to the Rock Saber’s unique Wi-Fi SSID under settings.

Q: My light isn't reacting to music.
A: Make sure the sound mode is enabled and the alternate cap with mic holes is installed. Increase sensitivity if needed.

Conclusion

Your Rockville Rock Saber offers versatile mounting and advanced lighting controls, including DMX, manual colors, app syncing, and sound responsiveness. Use the mini stand for floor placement or upgrade to the Saber Stand X1 for vertical effects. Explore the various modes to create dynamic light shows for any event.