RPG2X15: How To Connect A Powered Sub

Introduction

In this guide, we’ll show you how to enhance your Rockville RPG2X15 setup by connecting a powered subwoofer. Adding a subwoofer will improve your low-end sound, delivering deep, rich bass for a fuller audio experience. Follow the simple steps below to integrate a powered subwoofer with your existing mixer.

Step-by-Step Instructions

1. Understanding the Line Out

• The line out on the back of the RPG2X15 mixer is a non-powered output, which means it’s specifically designed for connecting powered speakers or subwoofers.
• Important: Never connect this line out to a passive speaker or passive subwoofer as it will not produce any sound.

2. Connecting the Subwoofer to the Mixer

• Prepare Your Equipment: Grab a ¼-inch cable (typically included with your subwoofer) and follow these steps:
  1. Plug one end of the ¼-inch cable into the line output on the back of your mixer.
  2. Plug the other end of the cable into the ¼-inch line input on your powered subwoofer.

3. Adjusting Volume and Settings

• Raise Master Volume: Ensure the master volume on your mixer is raised to an audible level.
• Subwoofer Volume: Increase the volume on your powered subwoofer to the desired level.
• Set Low Pass Filter: Adjust the low pass filter on your subwoofer to set the desired frequency range. This determines the bass frequencies the subwoofer will handle.

4. Testing the Sound

• Play Audio: After setting up, play some audio through your mixer to test the subwoofer.
• Fine-Tune: You should hear the enhanced bass coming from your subwoofer. Fine-tune the volume and low pass filter for the best performance.

5. Alternative Setup with Powered Speakers

• If you want to connect a powered speaker instead of a subwoofer, you can follow the exact same steps as above. Simply plug your ¼-inch cable into the line output of the mixer and into the line input of the powered speaker.

Conclusion

Setting up a powered subwoofer with your RPG2X15 mixer is a simple way to enhance the audio experience by adding powerful bass. By following the easy steps above, you can integrate a subwoofer or powered speaker into your setup for a more dynamic sound.