RPG2X15: How To Set Up The Speakers

Introduction

Setting up your Rockville RPG2X15 system is straightforward, especially when it comes to installing and adjusting the speakers. This guide will take you through the process of setting up the speaker stands, mounting the speakers, and connecting them to your mixer. With these simple steps, you'll be ready to rock!

Step-by-Step Instructions

1. Setting Up the Speaker Stands

• Adjust the Legs of the Stand:
  1. Begin by loosening the bottom knob of the stand.
  2. Push down on the base of the stand to spread the legs.
  3. Adjust the width of the legs to your preferred setting.
  4. Once you've found the right position, tighten the bottom knob to lock the legs in place.
• Adjust the Height of the Stand:
  1. Loosen the top knob to adjust the height of the stand.
  2. Pull up on the top of the stand and align it with your desired height.
  3. Once you’ve found the ideal height, insert the safety pin into the lowest hole to secure the height.
  4. For extra security, tighten the top knob to lock the height in place.

2. Mounting the Speakers

• Attach the Speaker to the Stand:
  1. Loosen the mounting knob located at the bottom of the speaker.
  2. Line up the pull mount of the speaker with the top of the stand.
  3. Carefully set the speaker down on the stand.
  4. Tighten the mounting knob at the back of the speaker to secure it firmly to the stand.
• Repeat for the Second Speaker:
  Follow the same steps to set up the second speaker and stand.

3. Connecting the Speakers to the Mixer

• Using the Included Cables:
  1. Take the 2/4" cables that come with the speakers.
  2. Plug one end of each cable into the 1/4" input on the back of the speakers.
  3. Plug the other ends into the speaker outputs on the back of your mixer.
• Unplugging the Speaker Cables:
  1. To disconnect the speakers, simply press the red button on the cable connectors.
  2. This releases the connection safely, allowing you to pull out the cables.

Conclusion

Setting up your Rockville RPG2X15 speakers is quick and easy when following these steps. With your speakers securely mounted and connected to the mixer, you're all set for a great performance.