WET-Series: Commercial Use Installation Guide

Introduction

The Rockville WET Series speakers are IP55-rated indoor/outdoor 70V wall speakers designed for commercial and residential applications. They’re available in two sizes (5.25" and 6.5") and two colors (black and white). These speakers feature durable, weather-resistant construction, making them perfect for both indoor and outdoor installations.

This guide will walk you through their features, installation, wiring, and setup in a simple, step-by-step manner.

Step-by-Step Instructions

1. Unboxing and Features

• Choose between 5.25" or 6.5" models, in black or white.
• Each speaker includes a four-way swivel wall mount bracket for easy positioning (left, right, up, or down).
• Designed for 70V commercial audio systems with multiple tap settings.
• Can also be used in 8-ohm mode with a home theater receiver or stereo amplifier.

2. Installation Locations

The WET Series speakers are ideal for:

• Restaurants and bars
• Lobbies and retail stores
• Offices and gyms
• Dining halls and schools
• Outdoor patios and poolside areas

Thanks to their IPX55 weatherproof rating, they can handle rain, moisture, dust, sunlight, and even jet streams of water.

3. Mounting the Speakers

1. Use the included swivel wall mount bracket to install the speakers.
2. Adjust the angle to direct sound towards the desired listening area (e.g., angle downwards if mounted above a bar).
3. Tighten the bracket once positioned correctly for optimal sound coverage.

4. Wiring the Speakers

• 70V Wiring (Commercial Use):
  • Connect the positive (+) and negative (–) terminals from your amplifier to the speaker terminals.
  • Select a wattage tap setting on the back of the speaker:
    • WET 520 models: 2.5W, 5W, 10W, or 20W
    • WET 6525 models: 3.75W, 7.5W, 15W, or 30W
  • Wiring is parallel: run positive to positive and negative to negative across all speakers in the system.
• 8-Ohm Wiring (Home Use):
  • Switch the speaker to bypass mode.
  • Power handling: 40 watts at 8 ohms.
  • Connect directly to a home theater receiver or stereo amp.

5. Matching Amplifier Power

• Add up the total wattage tapped across all speakers.
• Ensure your amplifier can provide enough total wattage.
  • Example: 10 speakers tapped at 10W each = 100W total needed from your amplifier.

6. Sound Performance

• Each speaker is a two-way system with a woofer and tweeter for full-range sound.
• Works great for background music in quiet environments.
• Can be paired with a 70V subwoofer for fuller sound in bars, restaurants, or gyms.
• Balanced sound with solid low-end response, even at higher volumes.

Troubleshooting & FAQs

Q: Can I mix these with other 70V speakers?
Yes, you can mix and match different Rockville 70V speakers, even at different tap settings.

Q: What if my speakers sound distorted?

• Check if your amplifier is powerful enough for the total wattage load.
• Ensure correct wiring (positive to positive, negative to negative).
• Lower the tap setting if needed.

Q: Can I use these outdoors year-round?
Yes. With an IPX55 rating, they withstand rain, dust, and sunlight without rusting. The aluminum grill and powder-coated brackets prevent corrosion.

Q: Do I need a subwoofer?
Not required, but highly recommended for full, rich sound in large spaces or high-volume setups.

Conclusion

The Rockville WET Series wall speakers are durable, weather-resistant, and versatile for both commercial and residential audio needs. With easy parallel wiring, multiple wattage tap settings, and flexible mounting, they provide great sound quality indoors or outdoors.