WET-Series: Home Use Installation Guide

Introduction

The Rockville WET Series speakers are IP55-rated indoor/outdoor wall-mounted speakers designed for both home and commercial use. They are available in black or white finishes and come in two sizes: 5.25" and 6.5". These weather-resistant speakers are perfect for living rooms, home theaters, bedrooms, patios, and backyard areas, as well as restaurants, offices, or retail spaces.
This guide will walk you through their features, setup, and best use cases.

Step-by-Step Instructions

1. Unbox Your Speakers

Each package includes:

• Rockville WET Series speakers (pair)
• Four-way swivel wall mount brackets (pre-installed)
• Mounting hardware

2. Choose the Right Location

• Indoor use: Mount in your living room, bedroom, or home theater for clear stereo sound.
• Outdoor use: Perfect for patios, decks, and backyard areas.
• Commercial use: Ideal for restaurants, offices, or stores using 70V systems.

3. Understand Power and Impedance

• At 8 ohms, each speaker handles 40 watts RMS — ideal for home receivers or stereo amplifiers.
• For 70V systems, you can select power taps depending on the model:
  • WET 520 models (5.25"): 2.5W, 5W, 10W, 20W
  • WET 6525 models (6.5"): 3.75W, 7.5W, 15W, 30W

4. Mount the Speakers

• Use the included four-way swivel bracket to angle the speakers left, right, up, or down.
• Adjust positioning to direct sound toward your listening area for the best results.

5. Connect the Speakers

• For home/theater setups (8 ohm mode):
  • Connect speaker wire to the waterproof push terminals.
  • Switch the back knob to 8Ω mode.
  • Connect to your receiver or amplifier.
• For 70V commercial setups:
  • Select the desired wattage tap.
  • Connect to a 70V amplifier.

6. Optional: Add a Subwoofer

For deeper bass, connect a subwoofer to your system. Pairing the WET Series with a sub creates a fuller sound, especially for home theater or high-volume outdoor listening.

Key Features

• Durable Design: ABS waterproof cabinets, aluminum grille (rustproof), and powder-coated steel brackets.
• All-Weather Protection: IPX55-rated against rain, moisture, sun, dust, and water jet streams.
• High-Quality Audio: Two-way design with woofer and tweeter for clear highs and rich bass.
• Flexible Mounting: Four-way swivel bracket allows precise sound direction.
• Dual Use: Works with both 8-ohm home systems and 70V commercial systems.

Troubleshooting & FAQs

Q: Can I leave these speakers outside year-round?
A: Yes. With their IPX55 rating, they withstand rain, sun, dust, and water spray.

Q: Do I need an amplifier?
A: Yes. For home use, pair them with a stereo receiver or amplifier. For commercial setups, use a 70V amplifier.

Q: Will these work with my TV or home theater system?
A: Yes. Set them to 8-ohm mode and connect them as front, rear, or surround speakers in your system.

Q: How do I get more bass from these speakers?
A: Use them with a powered subwoofer for extended low-frequency performance.

Conclusion

The Rockville WET Series IPX55 wall speakers are a versatile choice for anyone looking to add high-quality audio indoors or outdoors. With weatherproof durability, flexible mounting, and support for both 8-ohm and 70V systems, they’re perfect for home, patio, and commercial applications.