Introduction:
This guide will walk you through the process of controlling your Rockville App Bar 24 using the "fi light" Mobile App. The app provides an alternative way to control your light in addition to the included remote control. With this app, you'll have access to more customization options, preset modes, and special features.
Requirements:
- Rockville App Bar 24 Light
- Smartphone (Apple iOS or Android; with operating system up to date)
- Bluetooth connectivity enabled on your smartphone
- "fi light" App (available on Apple App and Google Play Stores)
Setting Up the App:
Download and Install the App.
- Open the Apple App Store (iOS) or Google Play Store (Android) on your smartphone.
- Search for "fi light" in the search bar.
- Locate the "fi light" App in the search results.
- Tap "Get" or "Install" to download the app.
- Once downloaded, open the app.
- When prompted, allow the "fi light" App to access your Bluetooth devices by tapping "Allow".
Connect to Your App Bar 24.
- After allowing Bluetooth access, your phone will automatically pair with the App Bar 24.
- You can verify the connection by checking your phone's Bluetooth settings.
- Once connected, you can begin controlling your light through the app.
Using the App Features:
Basic Controls
Power:
- Use the Power button at the top of the app to turn your light on or off.
- Note: If you have a phone with a notch or "island" that blocks this button, you can use the included remote to power the light on/off.
Brightness:
- Use the Brightness bar in the middle of the app to adjust the light intensity.
- Slide right to increase brightness.
- Slide left to decrease brightness.
Color Controls
Color Wheel:
- Use the color wheel in the center of the app to set your light to any color.
- Tap anywhere on the wheel or drag your finger to select a color.
- The light will change color in real-time as you move around the wheel.
Warm / Cool Light Settings:
- Tap the Warm/Cool light button (circular; top right corner) to switch to temperature control mode.
- Adjust the slider to set the light to your preferred temperature:
- Slide toward the warm side for a yellow/orange tone.
- Slide toward the cool side for a blue/white tone.
Preset Colors and Settings | |
Warm White (WW): | Tap and adjust the slider for different warm white intensities. |
Cool White (CW): | Tap and adjust for different cool white intensities. |
Mixed Mode: | Use both warm and cool settings simultaneously. |
Brightness Presets: | Choose from preset brightness levels (100%, 50%, 25%, 5%) |
Color Presets: | Select from standard colors like red, green, blue, yellow, etc. |
Special Modes
Music Mode:
- Navigate to the Music menu.
- Select from pre-downloaded tracks or play music from your phone.
- The light will sync and respond to the rhythm of the music.
Style Mode:
- Go to the Style menu.
- Choose from various preset light effects:
- Pulsating Rainbow
- Pulsating Red
- + many other preset patterns
- Adjust the speed of the effect using the slider:
- Slide left for slower effects.
- Slide right for faster effects.
Tape Mode:
- Select the Tape mode.
- The light will react to sounds picked up by your phone's microphone.
- This can be useful for live music, DJ events and parties.
Timing Mode:
- Go to the Timing mode.
- Select your App Bar 24 from the device list.
- Choose a time slot.
- Set up a schedule:
- Select which days of the week you want the light to activate.
- Set the time when you want the light to turn on.
- Tap "OK" to save your settings.
Managing Multiple Lights:
Connect App Bar 24 Lights.
- Make sure both lights are powered on.
- Open the "fi light" App.
- Go to the Group Manage tab on the left side menu.
- Verify that both lights appear in the list.
- If they don't appear, check your Bluetooth settings.
Control lights using mobile app.
- Use the linking icons next to each light name to connect / disconnect lights.
- When both lights are linked (connected), they will respond to commands simultaneously.
- When a light is unlinked (disconnected), it will not respond to commands.
- You can control the color, brightness and mode of all connected lights at once.
Advanced Settings:
Left Side Menu
- Device Management: View and manage connected devices.
- Connect/Disconnect: Use the button next to each device to connect or disconnect.
- Group Manage: Access additional controls for your lights.
- Rename Devices: Give your lights custom names for easier identification.
Settings Menu (Right Side)
- User Guide: Access the app's user manual.
- Sync Music Guide: Learn how to synchronize lights with music.
- Shake Mode: Enable or disable shake features.
- Full Power Mode: Toggle maximum power output.
- About: Check app version and available updates.
Troubleshooting:
Light Not Connecting
- Ensure your light is powered on.
- Check that Bluetooth is enabled on your phone.
- Try closing and reopening the "fi light" App.
- Restart your App Bar 24 light.
Multiple Lights Not Syncing
- Make sure both lights appear in the Group Manage section.
- Verify that the linking icons show both lights as connected.
- Check your Bluetooth settings to ensure both lights are paired.
App Not Responding
- Close the app completely and restart it.
- Check for app updates in your device's app store.
- Ensure your phone's operating system is up to date.
Conclusion:
The "fi light" App provides a convenient and feature-rich way to control your Rockville App Bar 24 light. With customizable colors, special modes, and timing functions, you can create the perfect lighting atmosphere for any occasion. For a visual demonstration of these features, refer to the video tutorial.
Comments
0 comments
Please sign in to leave a comment.