TITAN PORTABLE ARRAY: How To Set Up & Use

Introduction: In this guide, we’ll show you how to set up the Rockville Titan Portable Array System. This system is perfect for events, providing a complete, portable sound solution. The setup is simple and includes everything you need for great sound, including a subwoofer, array pieces, and a mixer. We’ll walk you through the step-by-step process of assembling the system and getting everything connected.

Step-by-Step Instructions:

1. Unboxing the Titan Portable Array

• Your Titan Portable Array comes with:
  • Three array pieces
  • A subwoofer with the built-in mixer
  • A power cable for charging the system
  • A carrying bag for easy transport

2. Assembling the Array System

• Start with the Subwoofer:
  • The subwoofer serves as the base for the array system and contains the mixer and power source.
• Attach the First Middle Array:
  • Take one of the middle array pieces (identical with grooves and connectors on both ends).
  • Line up the connector end with the grooves on the top of the subwoofer and slide it in until it clicks into place.
• Attach the Second Middle Array:
  • Repeat the same steps as before to attach the second middle array, making sure it’s securely connected.
• Attach the Final Array Piece:
  • Take the top array piece (it has a flat top) and align it with the connector grooves.
  • Slide it onto the array stack and ensure it clicks into place.
• Power On the System:
  • Turn on the subwoofer using the power switch located on the back of the sub.
  • You’ll know the system is on when the power LED light on the subwoofer lights up.
• Check the Battery Life:
  • To check the battery life, look at the battery indicator on the back of the subwoofer.

3. Connecting a Microphone to Channel 1

• Prepare Your Microphone:
  • Plug the female end of the XLR cable into your dynamic microphone.
• Set Channel 1 to Mic Mode:
  • Insert the other end of the XLR cable into the input for Channel 1.
  • Set the channel to microphone mode by pressing the “Mic Line” switch.
• Adjust Volume:
  • Raise the channel volume for Channel 1, then raise the master volume and the subwoofer volume to hear the audio through the entire system.
• Test Your Microphone:
  • Speak into the microphone, and your voice should come out of the system.

4. Adjusting the Sound

• Treble and Bass Controls:
  • Use the Treble knob to adjust the high-end frequencies (raise for more clarity, lower for less).
  • Use the Bass knob to adjust the low-end frequencies (raise for more body, lower for less).
• Reverb:
  • Press the Reverb button to activate reverb for your microphone or instrument.
  • Adjust the Reverb knob to control the amount of reverb in the system.

5. Setting Up Channel 2 for an Instrument

• Connect Your Instrument:
  • Plug your guitar or bass into Channel 2 using a quarter-inch cable.
• Set Channel 2 to High-Z Mode:
  • Press the High Z switch to prepare the channel for guitar or bass input.
• Adjust Volume:
  • Raise the volume for Channel 2, along with the master volume and subwoofer volume, to ensure full audio output.

6. Using Channel 3 for Music Playback

• Connect Your Music Device:
  • Use the 1/8” input or RCA input to connect your music device.
• Set the System to Bluetooth Mode:
  • Press the Bluetooth button on Channel 3 for 2 seconds.
  • Pair your smartphone or tablet with the device labeled “Titan Portable Array.”
• Adjust Music Volume:
  • Raise the volume on Channel 3, the master volume, and the subwoofer to hear your music through the system.

7. Setting Up for Karaoke

• Connect Your Microphone:
  • Follow the same setup as Channel 1 for your microphone.
• Connect Your Tablet for Karaoke:
  • Pair your tablet with the system via Bluetooth, search for the device in your Bluetooth settings.
• Adjust Volumes:
  • Raise the volume for Channel 3 to hear your music.
  • Adjust the microphone volume for clear voice output.

8. Linking Two Titan Systems Using TWS (True Wireless Stereo)

• Activate TWS on Both Systems:
  • Ensure both Titan systems are powered on.
  • Press the TWS button on both units until the BT status light starts blinking.
• Pair the Systems:
  • Once the lights are solid, both systems are linked.
• Connect Bluetooth Device:
  • Pair your Bluetooth device (smartphone or tablet) to both systems by selecting “Titan Portable Array.”
• Adjust Volumes:
  • Raise the volume for Channel 3, master volume, and subwoofer on both systems for balanced sound.

9. Using Mix Output to Sync Audio Between Systems

• Connect Mix Output:
  • Use a quarter-inch cable to connect the mix output of the primary system to Channel 1 on the second system.
• Set Channel 1 to Line Mode:
  • Switch Channel 1 on the second system to Line Mode.
• Adjust Volumes:
  • Raise the volume on Channel 1, master volume, and subwoofer on both systems to sync audio.

10. Disassembling the System for Storage

• Remove the Array Pieces:
  • Carefully detach the array pieces starting from the top, middle, and then bottom by sliding each piece off.
• Pack in the Bag:
  • Place each array piece into its designated pocket in the carrying bag.
  • Pack the subwoofer and power cable in the main compartment of the bag.
• Carry the System:
  • Use the handles or shoulder strap to carry the system comfortably to your next gig.

Conclusion: Setting up and using your Rockville Titan Portable Array System is easy and versatile. Whether you’re using it for live performances, karaoke, or even linking two systems for a larger sound setup, this system provides the flexibility and power you need.