TITAN PORTABLE ARRAY: How To Assemble & Disassemble

Introduction: In this guide, we will walk you through the easy process of assembling and disassembling your Rockville Titan Portable Array System. This versatile system is perfect for gigs and events, and with just a few simple steps, you’ll be ready to go. Whether you're setting it up for the first time or packing it away after an event, we'll cover everything you need to know.

Step-by-Step Instructions:

1. Assembling the Titan Portable Array System

a) Start with the Subwoofer

• The subwoofer is the base of the system and contains the mixer and all necessary connections.
• You will need to connect the three array pieces to the top of the subwoofer.

b) Identify the Array Pieces

• Top Array Piece: This piece has a flat top and grooves with a connector on the bottom.
• Middle Array Pieces: These two pieces are identical, with grooves and connectors on both ends.

c) Attach the First Middle Array Piece

• Take one of the middle array pieces and line up the connector with the grooves on the subwoofer.
• Slide the piece onto the subwoofer and push it all the way through to ensure it’s securely attached.

d) Attach the Second Middle Array Piece

• Repeat the same process for the second middle array piece, lining it up with the top of the first array and ensuring it’s firmly connected.
• You’ll hear a click when the pieces are securely connected.

e) Attach the Final Array Piece (with speakers inside)

• Take the final array piece, which has the speakers inside.
• Line up the connector with the top of the second array and slide it in until you hear the click, confirming it’s properly attached.

f) Power On the System

• Turn on the speaker by using the power switch on the back of the subwoofer.
• You’ll know the system is powered on when the power LED light lights up.
• You can check the battery life by looking at the back of the subwoofer.

2. Disassembling the Titan Portable Array System

a) Remove the Top Array Piece

• Carefully push at the base of the top array piece to begin detaching it from the system.
• Gently slide it off, taking care not to let it fall.

b) Remove the Middle Array Piece

• Repeat the same process for the second middle array piece.
• Push at the base and slide it off carefully.

c) Remove the Bottom Array Piece

• Detach the final array piece (the bottom one) in the same manner by pushing at the base and sliding it off from the subwoofer.

d) Pack the Array Pieces into the Bag

• Place each of the array pieces into the dedicated pockets in the carrying bag. Each array piece has its own compartment for a secure fit.

e) Store the Subwoofer and Power Cable

• Place the subwoofer in the main compartment of the bag.
• There is extra room for the power cable, which you can also store in the bag.

f) Close the Bag

• Once everything is packed, close the bag and use the handles for easy transport.
• You can also Velcro the handles together for a more secure grip.

3. Additional Tips

• Always check the connections before using the system to ensure all pieces are securely attached.
• Keep the carrying bag handy for easy transportation to your next event.
• When disassembling, be sure to handle the array pieces gently to prevent damage.

Conclusion: 

Assembling and disassembling your Rockville Titan Portable Array System is quick and simple, allowing you to transport it easily for events. Whether you’re a performer or an event organizer, this system offers powerful sound and easy setup.