TITAN PORTABLE ARRAY: How To Link 2 Systems

Introduction: In this guide, we’ll walk you through the simple steps to link two Rockville Titan Portable Array systems together using the TWS (True Wireless Stereo) connection. This feature allows you to amplify your sound by connecting two systems, providing a richer, fuller audio experience. Whether you’re hosting a larger event or just want to double the sound output, this setup is easy and straightforward.

Step-by-Step Instructions:

1. Prepare the Systems

• Power On Both Systems: Ensure both Titan Portable Arrays are powered on before attempting to connect them via TWS.

2. Activate TWS on Both Systems

• Press the TWS Button: Hold down the TWS button on both systems.
• Wait for the Connection: The BT status button on both systems will begin to blink, indicating that the systems are searching for each other.
• Connection Confirmation: Once both systems have found each other, the BT status button will stay lit, signaling that the connection has been established.

3. Pair a Bluetooth Device

• Go to Bluetooth Settings: On your smartphone or tablet, open the Bluetooth settings.
• Search for 'Titan Portable Array': Look for the device labeled “Titan Portable Array” and click to pair.
• Confirm Connection: Once paired, the BT status light will remain on, confirming the connection.

4. Adjust the Volume for Both Systems

• Select Channel 3: On both systems, go to channel 3 and press the Bluetooth button.
• Raise Volume Knobs: Increase the volume for channel 3 on both systems.
• Master and Sub Volume: Ensure the master volume and sub volume are both turned up to hear the audio clearly through both systems.

5. Test the Sound

• Play Music: You can now play music from your Bluetooth device to test the sound output across both systems.
• Adjust as Needed: Both systems should now be synchronized, providing seamless sound across both units.

6. Disconnecting the Systems

• Hold the TWS Button: To disconnect, simply hold the TWS button on either system (or both) to unlink the devices.
• Reconnect Instructions: If you forget how to reconnect the systems, check the description under the BT status button for instructions.

7. Linking Two Systems with a Microphone or Instrument

• Use the Mix Output: If you want both systems to output a microphone or instrument, you can link the systems via the mix output.
• Connect Using a 1/4-Inch Cable: Plug one end of a 1/4-inch cable into the mix output of the main system and the other end into either channel 1 or channel 2 of the second system.
• Set Channel to Line Mode: Switch the channel to line mode on the second system.
• Raise the Volume Knobs: Adjust the volume for the selected channel, master volume, and sub volume to ensure proper output across both systems.

8. Using Stereo or Mono Mode

• Stereo Mode: With the stereo mode selected, each speaker will play different channels (left and right), creating a full stereo sound.
• Mono Mode: If you prefer both speakers to play the same audio, switch to mono mode to duplicate the sound across both systems.

9. Final Test and Adjustments

• Test the Microphone or Instrument: Plug a microphone or instrument into the main system and make sure it plays through both systems.
• Adjust as Needed: You can adjust the volume and other settings on both systems to balance the sound output.

Conclusion: Linking two Titan Portable Arrays together using TWS is a quick and effective way to enhance your audio setup for larger events or performances. The process is easy to follow, allowing you to enjoy true wireless stereo sound.