FLX SERIES: How To Set Up & Use

Introduction:
The Rockville Flex Rack Stand is a customizable storage solution that comes in three different wood finishes: dark wood, classic wood, and black wood. In this guide, we'll walk you through the simple process of assembling the stand, customizing the height of each tier, and selecting the right feet for your surface.

Requirements:

• Rockville Flex Rack Stand
• 24 steel tubes (various sizes)
• Hardware for assembly
• Allen key and screws (included)
• Caster wheels, carpet spikes, or rubber feet (depending on preference)

Step-by-Step Instructions:

1. Assemble the Feet for the Stand

• Prepare the Feet Tubes:
  • Start by grabbing the four feet tubes.
  • Take four screws and attach them to each of the feet tubes by lining up the screw holes on the side of the tube.
• Attach the Feet to the First Shelf:
  • Once the screws are attached, take your first shelf and line up each tube to the holes at the bottom of the shelf.
  • For now, use the rubber feet for a stable setup on hardwood floors or delicate surfaces. If you prefer, you can choose caster wheels or carpet spikes later.
• Place the Shelf:
  • After attaching the feet, place the shelf down as the base of your stand.

2. Set Up the First and Second Tiers

• Tier Customization:
  • You have four small tubes, four medium tubes, eight regular tubes, and four extra-long tubes to customize the height of your tiers.
  • For the smaller tier: Use the four small tubes.
    • Line up the bottom of each tube with the screw holes on top of the shelf and secure it with screws.
    • Attach the second shelf by aligning the holes and sliding it onto the tubes.
  • For a taller tier: Use the extra-long tubes for additional room.
    • Line up the tubes with the screw heads and secure them with screws.
    • Attach the next shelf in the same way.

3. Complete the Setup of Additional Tiers

• For the Final Tier:
  • Use the regular-sized tubes to create a balanced setup.
  • Line up the tubes with the screw holes and secure them with screws.
  • Once the final shelf is placed, use the four Allen key screws to secure the top shelf in place.

4. Customize the Feet (Caster Wheels or Carpet Spikes)

• Removing the Rubber Feet:
  • If you'd like to change the feet, simply pull off the rubber feet. This will reveal screw holes for caster wheels or carpet spikes.
• Installing Caster Wheels for Mobility:
  • Lock each wheel by pressing the lock down.
  • Attach each caster wheel to the screw holes and tighten them securely.
  • Once attached, flip the stand over, and use the brakes to move the stand around and lock it in place.
• Installing Carpet Spikes for Stability on Rugs:
  • Attach the carpet spikes by screwing them into the holes on the tubes.
  • If the stand is uneven, adjust the nuts on the spikes to either raise or lower the stand until it’s level.
• Reattaching Rubber Feet:
  • If you prefer the rubber feet again, simply slide them back onto the tubes after removing the caster wheels or carpet spikes.

5. Add an Additional Tier (Optional)

• Purchasing Additional Shelves:
  • If you need more space, you can purchase additional shelves that come with four tubes and screws.
• Adding the Additional Shelf:
  • Follow the same steps to attach the new shelf, screws, and tubes as outlined above.
  • Customize the height as needed by using the included tubes or the extra-long tubes.

Conclusion:

The Rockville Flex Rack Stand is versatile and easy to customize, whether you need more space between shelves, mobility, or a stable setup for different surfaces.