FLX SERIES: How To Customize The Height

Introduction:
Customizing the height of your Rockville Flex Rack Stand allows you to organize your setup with the perfect amount of space between each tier. This guide will walk you through the simple steps to adjust the height of each tier using different tube sizes, allowing for flexibility based on the items you plan to store.

Requirements:

• Rockville Flex Rack Stand
• Four small tubes
• Four medium tubes
• Eight regular tubes
• Four extra-long tubes
• Allen key and screws (included)

Step-by-Step Instructions:

1. Set Up the First Tier

• Start by ensuring that the bottom tier is properly set up. Once that’s done, you can move on to the next tier.
• Choose the Tube Size for the First Tier:
  • If you want a smaller space between the shelves, use the four small tubes.
  • Install the Tubes: Line up the bottom of each tube with the screw on top of the shelf and screw them in place.
  • Install the Second Shelf: Line up the holes on the bottom of the shelf with the screws on top of the tubes and slide it in place.

2. Set Up the Second Tier

• If you want to create extra space between the shelves, use the extra-long tubes for this tier.
• Install the Extra-Long Tubes: Screw the extra-long tubes into the screw heads just like the smaller tubes.
• Install the Third Shelf: Attach the next shelf by lining up the holes on the bottom to the screws on top of the tubes.

3. Customize Your Setup

• Now, you have the option to mix and match the tube sizes depending on the space you need between the shelves.
  • For smaller items: Use the shorter tubes for more compact tiers.
  • For taller items: Use the extra-long tubes to create more space.

4. Final Tier Setup

• For the last tier, use regular-sized tubes for a standard setup.
• Install the Tubes: Screw the regular tubes into the screw heads as before.
• Attach the Final Shelf: Line up the shelf on top of the tubes.
• Secure the Top Shelf: Use the four Allen key screws provided to lock the top shelf in place. Tighten the screws using the included Allen key.

5. Finish the Setup

• After securing the top shelf, your Flex Rack Stand is fully assembled and ready to go!

Conclusion:

Customizing the height for your Rockville Flex Rack Stand is an easy way to make your storage or display system flexible and efficient. With multiple tube sizes available, you can adjust the space between each tier to fit your specific needs.