How To Set Up Wireless DMX on your MINI RF Light (MINI RF1 V2, MINI RF3, MINI RF4)

Introduction

The Rockville Mini RF LED Wash Lights can be wirelessly controlled using a DMX controller, allowing for precise lighting adjustments without running cables. This guide will walk you through:

• Setting your lights to Wireless DMX mode
• Syncing your lights to the same RF group
• Using the DMX controller to adjust brightness, colors, strobe effects, and modes

Step 1: Setting Up Your Lights for Wireless DMX Mode

1. Power on all Mini RF lights you want to control.
2. Double press the power button on each light until the LED indicator blinks twice quickly (this sets them to Slave/Wireless DMX mode).
3. Assign all lights to the same RF Color Group:
   • Single press the power button to switch between Red, Green, Yellow, or Blue.
   • Ensure all lights are in the same RF group as your DMX controller.

Step 2: Connecting the Wireless DMX Controller

1. Power on your DMX controller.
2. Set your DMX controller to the same RF color group as your lights. (For example, if your lights are set to Red, set your DMX controller to Red as well).
3. Activate Scanner 1 on the DMX controller to start controlling the lights.

Step 3: Using the DMX Controller with Your Lights

Once your controller is synced, you can use the DMX faders to adjust different lighting effects:

• Fader 1: Controls overall brightness (raise all the way up for full brightness).
• Fader 2: Adjusts Red LED intensity.
• Fader 3: Adjusts Green LED intensity.
• Fader 4: Adjusts Blue LED intensity.
• Fader 5: Adjusts White LED intensity.
• Fader 6: Adjusts Amber LED intensity.
• Fader 7: Adjusts Ultraviolet LED intensity.

You can mix colors by adjusting multiple faders at once.
Example: Raise Fader 2 (Red), Fader 3 (Green), and Fader 5 (White) to create a custom color.

Step 4: Using Special Effects & Custom Modes

• Fader 8: Activates strobe effects (higher fader = faster strobe).
• Fader 9: Selects preset lighting modes.
  • 120-159 value → Color Pulse Mode (light pulses between colors)
• Fader 10: Adjusts mode speed (higher fader = faster effect).

You can check which values correspond to different effects by referring to the DMX guide or the screen on your DMX controller.

Conclusion

Setting up your Rockville Mini RF LED Wash Lights with a wireless DMX controller provides advanced lighting control without needing messy cables. Now, you can adjust brightness, mix colors, and trigger effects easily.