How To Use Master/Slave Mode on Your MINI RF Light (MINI RF1 V2, MINI RF3, MINI RF4)

Introduction

The Rockville Mini RF LED Wash Lights allow you to sync multiple lights together without needing a DMX controller using the Master-Slave feature. This lets you control all lights from a single Master light, ensuring they display the same colors and effects simultaneously.

This guide will walk you through:

• Setting lights to Slave Mode
• Assigning a Master light
• Syncing multiple lights in Master-Slave Mode
• Making adjustments after setup

Step 1: Setting Up Slave Lights

To sync multiple lights, you first need to assign Slave lights that will follow the Master light.

1. Power on all lights you want to sync.
2. Double press the power button on each Slave light until the LED indicator blinks twice quickly.
3. Assign all Slave lights to the same RF Color Group:
   • Single press the power button to switch between Red, Green, Yellow, or Blue.
   • Make sure all Slave lights are set to the same color group as the Master light.

Step 2: Assigning the Master Light

Now, choose the light that will control the others.

1. Power on the Master light.
2. Set it to RF Mode (The LED indicator should be solid and not blinking).
3. Use the remote to match the RF group of the Master light to the Slave lights:
   • Press the RF Group button on the remote.
   • Keep pressing until the remote's color matches the lights’ RF group (e.g., Red).

Step 3: Activating Master Mode

1. Select the mode or color you want on the Master light.
2. Double press the power button on the Master light until the LED indicator blinks once quickly.
3. All Slave lights will now follow the Master light.

If you change the color, mode, or effect on the Master light, all Slave lights will automatically update.

Step 4: Making Adjustments

If you want to change settings after setting up the Master-Slave mode:

1. Set the Master light back to RF Mode (LED indicator should be solid, not blinking).
2. Adjust the Master light’s color, mode, or effect.
3. Double press the power button to set it back to Master Mode (LED indicator blinks once quickly).
4. All Slave lights will now follow the new settings.

Conclusion

Using the Master-Slave feature on your Rockville Mini RF LED Wash Lights is an easy way to sync multiple lights together without needing a DMX controller.