How To Group Your MINI RF Lights

Introduction

Grouping your Rockville Mini RF LED Wash Lights allows you to control multiple sets of lights independently or together using a single remote. This guide will show you:

• How to assign lights to different groups
• How to control each group separately
• How to control all lights at once

Step 1: Set Lights to RF Mode

1. Power on all Mini RF lights you want to group.
2. Double press the power button on each light until the LED indicator stays solid (this sets them to RF mode).

Step 2: Assign Lights to Color Groups

Each RF light can be assigned to one of four color groups:
Red
Green
Yellow
Blue

To assign a light to a group:

1. Single press the power button to cycle through the color groups.
2. Stop when the LED indicator matches your desired group.

Example: Set one set of lights to Red and another set to Green.

Step 3: Control Each Group Separately

1. Take your RF remote and press the RF Group button.
2. Keep pressing until the remote flashes the same color as the group you want to control.
3. From here, you can:
   • Change colors
   • Adjust brightness
   • Set effects and modes for the selected group.

Example: If the remote is set to Red, it will only control lights assigned to the Red group.
If you switch the remote to Green, it will only control the Green group.

Step 4: Control All Lights at Once

If you want to sync all lights, you can:

1. Set your remote to the White RF Group.
2. Now, any mode, effect, or color change you make will apply to all lights—no matter their previous group.

This is useful for coordinating all lights to match at once.

Conclusion

By grouping your Mini RF LED Wash Lights, you can create dynamic lighting setups for events, DJ performances, or decorative applications. Whether controlling individual groups or syncing all lights, the RF grouping system makes adjustments simple.