BASS PARTY 8: How To Set Up & Use

Introduction

The Rockville Bass Party 8 is a versatile portable speaker with LED lighting, Bluetooth connectivity, live performance inputs, and True Wireless Stereo (TWS). Whether you're using it for music playback, karaoke, or live performances, this guide will walk you through setup, controls, and key features.

What's Included in the Box

• Bass Party 8 Speaker
• Power Cable (for charging the speaker)
• AUX Cable (for wired connections)
• Wireless Remote (batteries not included; requires two AAA batteries)

Step 1: Powering On and LED Modes

1. Turn on the speaker by flipping the power switch to the ON position.
2. Adjust the LED lighting modes:
   • Press the LED button to cycle through eight different LED modes.
   • The LEDs can sync with the music, display patterns, or be turned off.
   • The volume wheel also lights up as you adjust it.

Step 2: Connecting Your Music Device

Bluetooth Mode

1. Press the Mode button until the display shows "BLUE" (Bluetooth Mode).
2. On your smartphone or tablet, go to Bluetooth settings.
3. Search for "Bass Party 8", then select and pair it.
4. When you hear a confirmation sound and see the "BLUE" indicator solid, you’re connected.
5. Play music from your device, and control volume using either:
   • Your phone’s volume controls.
   • The volume wheel on the speaker.

AUX (Wired) Mode

1. Plug one end of the AUX cable into your music device.
2. Plug the other end into the AUX input on the speaker.
3. Press the Mode button to switch to AUX mode.
4. Control volume using the speaker or your device.

USB/SD Card Mode

1. Insert a USB flash drive or SD card with stored music.
2. Press the Mode button to switch to USB/SD mode.
3. Use the Playback buttons to pause, play, skip, or go back.

Step 3: Adjusting Sound Settings

Use the Menu button to access the following settings:

• T (Treble) – Adjusts high frequencies.
• B (Bass) – Adjusts low-end response.
• C (Microphone Volume) – Adjusts mic volume.
• NT (Mic Treble) – Controls high-end frequencies for the mic.
• NB (Mic Bass) – Controls low-end frequencies for the mic.
• Echo – Adds an echo effect to the mic.
• GT (Guitar Volume) – Adjusts the guitar input level.
• U (Master Volume) – Controls the overall speaker volume.

Bass Boost (EQ Mode)

• Press the EQ button to activate Bass Boost for deeper sound.
• The display will show "BASS" when active.
• Press again to turn off Bass Boost.

Step 4: Using the Speaker for Karaoke

1. Connect a microphone:
   • Use a female XLR-to-1/4-inch cable.
   • Plug the XLR end into the microphone.
   • Plug the 1/4-inch end into the Mic Input on the speaker.
2. Adjust mic volume:
   • Press Menu and adjust the C (Microphone Volume) setting.
3. Enhance your sound:
   • Adjust Mic Treble (NT) and Mic Bass (NB) for clarity.
   • Use the Echo setting to add reverb.
4. Sing along with music:
   • Pair your smartphone/tablet via Bluetooth.
   • Play a karaoke track (e.g., on YouTube).
   • Read the lyrics from your device (fits in the built-in slot).

Mic Priority Mode

• Press the Mic Priority button to automatically lower music when speaking.
• This is useful for announcements.
• Press again to disable if using for karaoke.

Step 5: Using the Speaker for Live Performance

1. Connect a guitar:
   • Use a 1/4-inch instrument cable.
   • Plug it into the Guitar Input.
2. Adjust guitar volume:
   • Press Menu until you reach GT (Guitar Volume).
   • Turn the volume wheel to the desired level.
3. Use the mic and guitar simultaneously:
   • Perfect for solo performances.
   • Adjust the mix with Mic and Guitar Volume settings.

Step 6: True Wireless Stereo (TWS) Mode

Want stereo sound with two Bass Party 8 speakers? Use TWS Mode:

1. Turn on both speakers and set them to Bluetooth Mode.
2. Ensure no device is already connected to either speaker.
3. Choose one speaker as the main unit.
4. On the second speaker, press and hold the Play button (TWS button).
   • The display will show "SLAVE" when linked.
5. Connect your Bluetooth device to the main speaker.
6. Now, both speakers will play in sync!
7. Control playback and volume from either speaker.

Note: TWS mode only works with Bluetooth music playback.
Microphones, guitars, AUX, USB, and SD card playback will not transmit between both speakers.

Step 7: Recording Audio

• Record vocals or guitar performance:
  • Plug in a USB drive.
  • Press the Record button to start recording.
  • Press again to stop and save your recording.

Conclusion

The Rockville Bass Party 8 is a powerful all-in-one speaker for: ✅ Bluetooth Music Playback
✅ Live Performances with Microphone & Guitar
✅ Karaoke with Echo Effects
✅ TWS Mode for Stereo Sound
✅ LED Light Show with Multiple Modes