BASS PARTY 8: How To Control The LEDs

Introduction

The Rockville Bass Party 8 features multiple LED modes that add an exciting light show to your music. This guide will walk you through the different LED modes and how to control them.

How to Change LED Modes

1. Locate the LED button on the top of the speaker.
2. Press the LED button to cycle through the eight different LED modes.
3. After LED Mode 8, pressing the button again will turn off the LEDs.

LED Mode Breakdown

1. LED Mode 1 – Lights circle around each woofer inside the speaker.
2. LED Mode 2 – LEDs move in unison, circling around both woofers.
3. LED Mode 3 – Top and bottom lights change color to the music.
4. LED Mode 4 – Lights cycle between the top woofer and bottom woofer.
5. LED Mode 5 – Hue effect moves from top to bottom and back up.
6. LED Mode 6 – Lights circle around the top woofer, then the bottom woofer, then back up.
7. LED Mode 7 – Lights move in a figure-eight motion between the woofers.
8. LED Mode 8 – Lights alternate between the woofers.

LED Auto-Sync with Volume

• When an LED mode is active, the volume wheel lights up and moves along with the volume adjustment.

Turning Off the LEDs

• If you want to turn off the LEDs completely, press the LED button after cycling through all 8 modes.

Conclusion

The Bass Party 8’s LED modes add a dynamic visual element to your music. Experiment with different settings to match the vibe of your party, DJ setup, or karaoke night!