BASS PARTY 8: How To Create A Live Performance

Introduction

The Rockville Bass Party 8 is an excellent portable speaker for live performances, allowing you to connect both a microphone and a guitar simultaneously. This guide will walk you through:

• Setting up a microphone
• Adjusting microphone sound settings
• Connecting and adjusting a guitar
• Playing along with backing tracks
• Optimizing your live performance setup

Setting Up a Microphone

What You’ll Need

✔ Dynamic microphone
✔ XLR to 1/4" (6.35mm) cable

Steps to Connect Your Microphone

1. Plug the female XLR end of your cable into the microphone.
2. Insert the 1/4" end into the MIC input on top of the speaker.
3. Adjust the microphone volume:
   • Press the Menu button repeatedly until you reach "C" (Mic Volume).
   • Turn the Volume Wheel to raise or lower the microphone level.
   • Test by speaking into the mic: "Check one two".

Adjusting Microphone Sound Settings

Use the Menu button to access the following settings:

1. Mic Treble (NT)

• Adjusts high frequencies for clearer vocals.
• Lowering it: Reduces brightness, making vocals sound softer.
• Raising it: Increases presence, making vocals stand out.

2. Mic Bass (NB)

• Adjusts low frequencies for a fuller sound.
• Lowering it: Reduces bass, making vocals thinner.
• Raising it: Adds warmth and body to vocals.

3. Echo Effect

• Adds a reverb/echo effect to the microphone.
• Increasing the level: Creates a dramatic echo.
• Lowering the level: Reduces or eliminates the effect.

✅ Tip: For a natural vocal sound, keep treble and bass balanced.

Connecting a Guitar

What You’ll Need

✔ Electric or acoustic-electric guitar
✔ 1/4" (6.35mm) instrument cable

Steps to Connect Your Guitar

1. Plug one end of the instrument cable into your guitar.
2. Plug the other end into the GUITAR input on top of the speaker.
3. Adjust the guitar volume:
   • Press the Menu button until you reach "GT" (Guitar Volume).
   • Turn the Volume Wheel to increase/decrease the volume.
   • Raise the guitar’s volume knob and start playing.

✅ Tip: If you’re using an acoustic-electric guitar, ensure the pickup system is powered on.

Using Backing Tracks & Music Playback

The Bass Party 8 allows you to play along with backing tracks or recorded music using:

• Bluetooth
• AUX Input
• USB or SD Card

To switch between these modes:

1. Press the Mode button on the speaker.
2. Choose between:
   • Bluetooth mode (to stream music wirelessly)
   • AUX mode (for wired connection)
   • USB/SD mode (for pre-recorded tracks)

✅ Tip: Lower the music volume slightly so your live performance stands out.

Final Performance Setup

Microphone Connected & Adjusted
Guitar Connected & Adjusted
Backing Tracks Ready
Volume Levels Optimized

Conclusion

The Rockville Bass Party 8 is a versatile and portable speaker perfect for singers, guitarists, and performers. With built-in mic and guitar inputs, EQ adjustments, and music playback options, you can create a full live performance setup anywhere.