Introduction:
This article will walk you through how to set up and use your Rockville Mini RF1V2 4-Pack Wireless Par Lights. Whether you’re using them with a wireless DMX controller, in Master/Slave mode, or organizing them into RF groups for synced effects, the steps are easy to follow—even if you have no prior lighting experience.
What You’ll Need:
- Rockville Mini RF1V2 4-Pack (in black or silver)
- Included remotes and chargers
- Wireless DMX controller (optional)
Step-by-Step Instructions
1. Unboxing and Organizing Your Lights
- Inside the carrying case, you’ll find:
- 4 Mini RF1V2 lights
- 4 charging cables
- 1 remote control
- The case has dedicated pockets for each light and accessories.
- The internal dividers are removable so you can customize your layout.
- Zip up the case and fasten the handles to carry it easily.
2. Wireless DMX Controller Setup
Preparing the Lights:
- Turn on a light and double press the power button to enter Wireless DMX mode. The LED will blink twice rapidly.
- Single press the power button to set the color group: Red, Green, Yellow, or Blue.
- Repeat for all lights you want to control.
Setting the Controller:
- On your DMX controller, match the color group to your lights (e.g., Red).
- Activate "Scanner 1" (or relevant DMX fixture ID).
Using the Faders (12-Channel DMX):
- Fader 1 – Master brightness
- Fader 2–7 – Color channels:
- Red (2), Green (3), Blue (4), White (5), Amber (6), UV (7)
- Fader 8 – Strobe effect
- Fader 9 – Lighting mode selection (e.g., pulse mode between values 120–159)
- Fader 10 – Mode speed adjustment
Refer to your DMX guide for specific fader values and use the controller screen to monitor them.
3. Master/Slave Mode Setup
Setting Slave Lights:
- On each light, double press the power button to enter Slave mode (LED blinks twice).
- Set all to the same color group (e.g., Red) using single presses.
Setting the Master Light:
- Choose one light to act as the Master.
- Set it to RF Mode (solid LED color, not blinking).
- Match the RF group color on the remote to the master/slave lights.
- Set the Master light to Master Mode by double pressing the power button (LED blinks once).
- All slave lights will now follow the master light.
To Change Settings Later:
- Set Master light back to RF Mode (solid LED).
- Adjust mode/color as needed.
- Double press again to re-enter Master Mode, and slaves will sync to the new settings.
4. Using RF Groups to Control Multiple Light Groups
You can organize lights into different groups by assigning unique color groups:
Setup:
- Set each light to RF Mode (double press for solid LED).
- Assign a color group to each light using single power button presses.
- Example: Group A = Red, Group B = Green
- On the remote, press the RF Group button until it flashes the same color as the lights you want to control.
Control:
- Use the remote to control Group A (Red), then switch to Group B (Green).
- You can set different colors or modes for each group independently.
Control All Groups Simultaneously:
- Set the remote to the White RF Group to control all lights, regardless of color group.
Troubleshooting & FAQs
Q: My lights aren’t syncing with the DMX controller. What do I do?
A: Make sure all lights are in Wireless DMX mode and on the same color group as the DMX controller.
Q: How can I tell which mode my light is in?
A:
- Wireless DMX / Slave Mode: LED blinks twice quickly
- RF Mode: Solid LED color
- Master Mode: LED blinks once
Q: What does each RF group color mean?
A: They're used to group lights for independent control. Choose from Red, Green, Yellow, or Blue.
Q: Can I control multiple groups with one remote?
A: Yes, switch the RF group on the remote to match the group of lights you want to control. Use the White RF group to control all at once.
Conclusion
Setting up your Rockville Mini RF1V2 4-Pack is quick and versatile. Whether you’re linking them via wireless DMX, using Master/Slave sync, or organizing multiple RF groups, the process is designed to be simple and customizable.
Comments
0 comments
Article is closed for comments.