4 Pack MINI RF1 V2: How To Use Master / Slave Mode

Introduction

The Mini RF1 V2 Four Pack allows you to sync multiple lights together using the Master-Slave function. This setup ensures all slave lights follow the master light's mode and color settings, creating a cohesive lighting display.

Perfect for: DJs, event lighting, stage setups, and party lighting.
Wireless Syncing: No need for additional cables—everything is controlled remotely.

Step 1: Set the Slave Lights to Slave Mode

1. Turn on each light in your four-pack.
2. Double press the power button on each slave light until the LED indicator flashes twice quickly.
3. Set all slave lights to the same color group by single pressing the power button to cycle through:
   • Red
   • Green
   • Yellow
   • Blue
4. For this example, set all slave lights to the Red color group.

Step 2: Set the Master Light

1. Choose one light to act as the Master.
2. Set this light to RF mode by ensuring its LED indicator is solid (not blinking).
3. Set the remote to the same RF group as the Master light by pressing the RF Group button until it matches the master light’s color (in this case, Red).

Step 3: Syncing Master and Slave Lights

1. On the Master light, double press the power button until the LED indicator flashes once—this activates Master Mode.
2. Once activated, all slave lights will automatically sync with the Master.

Step 4: Adjusting Colors and Modes

• To change colors or modes, first switch the Master light back to RF Mode (solid LED indicator).
• Make your changes to the Master light (e.g., change colors, brightness, or effects).
• Reactivate Master Mode by double pressing the power button on the Master light until the LED indicator flashes once.
• All Slave lights will follow the updated settings.

Conclusion

The Master-Slave function for the Mini RF1 V2 Four Pack makes it easy to synchronize multiple lights wirelessly.