MINI RF1 V2 Charge Package: How To Set Up Master / Slave Mode

Introduction

This guide provides straightforward steps for setting up your Rockville Mini RF1 V2 lights using the Master/Slave functionality. Whether you're using a few lights or the entire set, these instructions make it easy to create coordinated lighting effects quickly.

Items Needed:

• Rockville Mini RF1 V2 Charge Package
• Included RF Remote

Step-by-Step Instructions

Step 1: Setting Up Your Slave Lights

1. Power on your lights by pressing the power button.
2. Activate Wireless DMX/Slave Mode on each slave light:
   • Double-press the power button until the LED indicator blinks twice quickly.
3. Set each slave light to the same color group by single-pressing the power button until your desired color group appears (Red, Green, Yellow, or Blue).
   (Example: Set all slave lights to Red.)

Step 2: Setting Up the Master Light

1. Select one of your Mini RF1 V2 lights to be the Master.
2. Ensure this Master light is set to the same color group as your slaves (e.g., Red).
3. On your RF remote, press the RF Group button repeatedly until the indicator matches the color group of your lights.
   (For example, keep pressing until the remote flashes Red.)

Step 3: Activating Master Mode

1. Set the Master light to RF Mode:
   • The LED indicator should remain a solid color (not blinking).
2. Select your desired mode or color using the RF remote.
3. Once you’ve chosen your settings, double-press the power button on your Master light to activate Master Mode (the LED indicator will blink twice quickly, showing it's in Master mode).

Now, all your slave lights will automatically synchronize and follow the Master’s settings.

Making Adjustments

If you want to change settings after activating Master Mode:

1. Switch the Master light back to RF Mode by double-pressing the power button until the LED indicator returns to a solid color.
2. Adjust your settings using the remote.
3. Double-press the power button again to return to Master Mode. All slave lights will automatically follow these changes.

Troubleshooting & FAQs

Q: Why aren’t my lights syncing in Master-Slave mode?

• Verify all lights are set to the same color group.
• Make sure the Master light’s indicator is blinking twice (Master mode active) and the slave lights' indicators blink twice quickly as well.

Q: Can I change colors or modes during operation?

• Yes. Switch your Master back to RF mode, adjust settings via the remote, then activate Master mode again.

Q: Can I use multiple color groups at the same time?

• No, for Master-Slave setups, all lights must be set to the same color group to sync correctly.

Conclusion

Your Rockville Mini RF1 V2 Charge Package is now successfully set up in Master-Slave mode, allowing synchronized control over your lighting.