K-GO: How To Mount

Introduction: 

The Rockville KGO Portable Speaker is versatile and easy to mount, whether you want to attach it to your bicycle, bar, or any other suitable surface. In this guide, we will walk you through the simple steps to mount your speaker and use it on the go with a lanyard or carabiner.

Step-by-Step Instructions:

1. Mounting Your KGO Portable Speaker

• Step 1: Locate the mounting screw on the back of the speaker and unscrew it.
• Step 2: Remove the screw and set it aside for later use.
• Step 3: Take out the rubber padding (optional) to help secure the speaker onto your bar or bicycle.
• Step 4: Open the bracket and use the opening to attach the speaker to your desired bar or bicycle.
• Step 5: If necessary, place one or both rubber pads inside the bracket to ensure a secure fit.
• Step 6: After securing the speaker, feed the screw back through the hole and tighten it to lock the speaker in place.

2. Using the Lanyard and Carabiner for Portability

• Step 1: Attach the thin end of the lanyard to the hook at the top of the speaker.
• Step 2: Feed the thick end of the lanyard through the thin loop and pull it through to secure the lanyard.
• Step 3: If desired, attach the carabiner either to the lanyard or directly onto the hook on top of the speaker.
• Step 4: You can now carry the speaker around with the lanyard or clip it onto your bag or belt loop using the carabiner.

3. Removing the Speaker from the Mount

• If you need to take the speaker off its mount, simply remove it from the holder and place it back when ready.

Conclusion:

Mounting and using your KGO Portable Speaker is simple, whether you’re attaching it to your bike, using the lanyard for hands-free carrying, or securing it with the carabiner for convenience. It’s an excellent choice for both mounted and on-the-go listening.