K-GO: Quick Start Guide

Introduction:
This guide walks you through the quick and easy setup of the Rockville K-GO portable speaker and wireless microphone. Perfect for karaoke, events, or casual playback, this speaker includes multiple voice effects and Bluetooth connectivity. No technical experience is needed to get started. All you need is your K-GO speaker, included wireless mic, and a Bluetooth-enabled device (such as a phone or tablet).

Step-by-Step Instructions

1. Locate the Controls

On the side of the K-GO speaker, you’ll find:

• Power button
• Playback buttons (Play/Pause, Volume +, Volume –)
• Track skip (Hold Volume + to skip forward, Volume – to skip back)

2. Power On the Speaker

• Press the Power button to turn the speaker on.
• You’ll hear a startup tone or see an indicator light showing it’s powered.

3. Power On the Wireless Microphone

• Press the Power button on the mic.
• When the blue light comes on, the microphone is active.
• Test the mic by speaking into it — your voice should come through the speaker.

4. Adjust Microphone Volume

• Use the Volume + / – buttons on the speaker to raise or lower the mic volume.
• Speak into the mic and adjust as needed for clarity and loudness.

5. Use Voice Effects

Press the Effects button on the mic to cycle through different voice effects:

• Reverb – Adds echo to your voice.
• High Pitch – Raises the pitch of your voice.
• Voice Cancel – Removes vocals from background music so you can sing over it.
• Auto Pitch – Adds auto-tune effect to your voice.
• Low Pitch – Deepens your voice.

6. Mount the Speaker (Optional)

• Use the mounting bracket on the back to attach the speaker to:
  • A mic stand
  • A bar mount
• Great for stationary setups at events or performances.

7. Connect via Bluetooth

• On your phone or Bluetooth-enabled device, go to Bluetooth settings.
• Search for the device labeled K GO.
• Tap to pair.

8. Start Your Karaoke Setup

• Open the YouTube app and search for karaoke versions of your favorite songs.
• Play the music through Bluetooth.
• Grab the mic and sing — both your vocals and the music will play through the speaker.
• Use the mic’s Effects button to enhance your vocals for added fun.

Troubleshooting & FAQs

Q: My microphone isn’t working. What should I do?

• Make sure the mic is powered on and the blue indicator light is lit.
• Confirm that the speaker is also powered on.
• Try raising the mic volume using the Volume + button.

Q: The speaker isn’t showing up in my Bluetooth list.

• Ensure Bluetooth is enabled on your device.
• Make sure the speaker is in pairing mode. Turn it off and back on if needed.
• Look for K GO in the available devices list.

Q: The voice cancel feature isn’t removing vocals completely. Why?

• This feature works best on songs with center-panned vocals.
• It may not fully remove vocals from all songs.

Q: How do I cycle back to a previous effect on the microphone?

• Keep pressing the Effects button to cycle through all available effects in a loop.

Conclusion

With just a few simple steps, your Rockville K-GO speaker and mic are ready for parties, karaoke, and fun. Explore the voice effects, mount the speaker for pro setups, and enjoy wireless music and vocals anywhere.