RPB50: How To Set Up TWS

Introduction:

This guide will walk you through how to set up TWS (True Wireless Stereo) mode with your Rockville RPB50 portable LED speakers. TWS allows you to wirelessly pair two RPB50 speakers together so you can enjoy stereo sound with music playing from both units simultaneously. These steps are easy to follow, even if you’ve never used Bluetooth speakers before.

Requirements:

• Two Rockville RPB50 portable LED speakers
• A Bluetooth-enabled device (e.g., smartphone, tablet)
• Ensure neither speaker is already paired to a Bluetooth device

Step-by-Step Instructions:

1. Power On Both Speakers

• Make sure both RPB50 speakers are turned on.
• Confirm that neither is currently connected to any Bluetooth device.

2. Choose Your Master Speaker

• Decide which of the two speakers you want to serve as the Master.
• This is the speaker you will initiate the TWS pairing from.

3. Activate TWS Mode

• On the Master speaker, quickly double-tap the power button.
• Wait for a confirmation sound—this indicates the speakers are successfully paired in TWS mode.

4. Connect Your Bluetooth Device

• On your phone or Bluetooth-enabled device, go to the Bluetooth settings.
• Search for available devices and tap on “RPB50” to pair.
• Once paired, you’ll hear a confirmation sound from both speakers.

5. Verify the TWS Connection

• Press the LED button on the Master speaker.
• If the LED lights on both speakers change at the same time, the TWS connection is working correctly.

6. Enjoy Stereo Sound

• Play your music and enjoy synchronized sound from both speakers.
• You’ll now get true stereo separation, enhancing the listening experience.

Troubleshooting & FAQs:

Q: One speaker isn’t playing sound. What should I do?

• Double-check that the Master speaker initiated TWS properly by redoing the double-tap on the power button.
• Make sure both speakers are powered on and within Bluetooth range.

Q: My Bluetooth device won't connect.

• Ensure that no other devices are currently paired with the speakers.
• Try restarting the Bluetooth on your phone and re-pairing.

Q: The LED lights don’t change on both speakers when I press the LED button.

• This likely means TWS isn’t activated correctly. Repeat the TWS pairing process from Step 3.

Conclusion:

Using TWS with your Rockville RPB50 speakers is a great way to amplify your sound and enjoy wireless stereo audio. Just follow these simple steps to pair your speakers and connect your Bluetooth device.