BATTERY PAR PACK 61: How To Set Up & Use

Introduction

The Rockville Battery PAR Pack 61 Charging Transport Case is designed to charge and transport your Battery PAR 61 wash lights conveniently. This case can hold and charge eight Battery PAR 61 lights, making it an efficient solution for DJs, event planners, and lighting professionals.

In this guide, we’ll walk you through:

• How to charge your lights using the case
• How to transport and secure your lights
• Additional features like stackability and accessory storage

What’s Included:

• 8x Battery PAR 61 Wash Lights (available in black or white)
• 8x Dual Brackets (for mounting or angling the lights)
• 8x IR Remotes (for wireless control)
• 8x Power Cables (one for each light)
• Main IEC Power Cable (for the case)
• Built-In Power Strip (in the case for charging)

Setup Guide

A.)  Setting Up the Charging Case

1. Position the Case:
   • Place the case on a flat surface.
   • Use the foot locking brakes (one in the front and one in the back) to keep the case from rolling.
2. Plug in the Lights:
   • Take the included power cable for each light.
   • Plug the female end into the power input socket on the light.
   • Plug the other end into any of the outlets on the power strip inside the case.
3. Power the Case:
   • Take the main power cable.
   • Plug the female end into the power socket on the side of the case.
   • Plug the other end into a wall power outlet.
4. Turn On the Charging System:
   • Flip the power switch on the side of the case.
   • The lights will start charging automatically.

B.) Charging Time & Battery Life

• If your lights are completely dead, they will take approximately 5 hours to fully charge.
• Once fully charged, the Battery PAR 61s can run for 10 to 15 hours*. 
  • Using lower frequency static colors (e.g. red / green) will drain the battery much slower.
  • Using higher frequency static colors (e.g. violet / white) and color-changing modes will drain the battery much faster.

*Battery life expectancy has been adjusted since the creation of this support video.

C.) Proper Charging Precautions

⚠️ Important Note: Always keep the case open while charging.

• The lights have powerful batteries, and leaving the case open allows proper ventilation to prevent overheating.
• Check the power strip connections to make sure all lights are charging properly.

D.) Transporting and Storing the Case

The case is designed for easy transport and stacking, making it ideal for professionals moving from gig to gig.

Locking & Securing the Case:

• The case features butterfly locks to securely close the lid.
• For extra security, you can use a padlock through the designated holes on the side.

Using the Foot Locking Brakes:

Located on the front and back corners of the case.

1. Before loading / unloading lights, press down on the locking brakes with your foot to prevent rolling.
2. To move the case again, simply release the brakes with your foot.

Stacking Multiple Cases:

If you have more than one Battery PAR Pack 61 case, they can be stacked for efficient storage and transport.

1. To stack, lock the wheels of each case first.
2. Then align the top case wheels with the grooves of the bottom case.
3. To move the stacked cases, release the brakes on the bottom case and roll the cases together.

E.) Using the Case for Storage

If you are not using all 8 lights in the Battery PAR Pack 61, the extra slot(s) in the case can be used for storing:

• Cables and Wires
• Microphones
• Additional Accessories

This keeps all your lighting gear organized in one place.

FAQs

Q: Why do I need to keep the case open while charging?

• The batteries generate heat, and keeping the case open ensures proper ventilation.

Q: How do I know if my lights are charging?

• Ensure the power cables are properly connected to the power strip.
• After flipping the power switch, check if the lights show charging indicators.

Q: Can I transport the case with the lights plugged in?

• No, always unplug the lights before moving the case to avoid damage.

Q: How do I secure my case when leaving it unattended?

• To prevent rolling, lock the wheels by pressing down on the front and rear locking brakes with your foot.
• Use a padlock through the built-in lock holes on the butterfly latches.

Conclusion

The Rockville Battery PAR Pack 61 Charging Transport Case is an efficient and convenient way to charge, transport, and store your Battery PAR 61 wash lights. By following these steps, you can easily set up, charge, and move your lighting gear.