RFSSB: How To Set Up Steel Frame DJ Event Facade

Introduction

The Rockville RFSSB Facade is a simple and versatile solution for enhancing your DJ or event setup. This guide will walk you through how to assemble, light, and pack your RFSSB facade, ensuring it’s ready for any gig or event.

1. Assembling the RFSSB Facade

Step 1: Stand the Frame Up

• Positioning the Frame:
  • Look for the feet on the frame to distinguish the top and bottom of the facade. Stand it up with the feet at the bottom.

Step 2: Leveling the Facade

• Adjusting the Feet:
  • If necessary, twist the feet on the bottom to level the facade on uneven surfaces like wood, carpet, or rough flooring.

Step 3: Attach the Scrims

• Aligning the Scrims:
  • The frame comes pre-assembled, so now all that’s left is attaching the black scrims.
  • Velcro Setup: Each panel has Velcro on the inside, which is where you’ll attach the scrims.
  • Attaching the Scrim:
    • Place the Velcro side of the scrim against the Velcro on the panel.
    • Start by lining up the top and sides of the scrim with the frame, then stretch the scrim down to ensure it’s smooth.

Step 4: Repeat for All Panels

• Complete the same process for the remaining scrims and panels.

2. Shaping the Facade

Step 1: Adjust the Shape

• The RFSSB facade is flexible and can be shaped to fit your needs.
  • Jagged Setup: If you prefer a more dynamic, jagged look, feel free to adjust the panels accordingly.
  • Traditional DJ Setup: For a classic look, position the front panels flat and bring the side panels inward to form a traditional appearance.

3. Lighting the RFSSB Facade

• Black Panels for Projection:
  • The black panels give you the ability to project light onto the facade for dramatic effects.
  • Position Lights:
    • Place your PAR lights or other lights behind the facade, angling them towards the panels to create stunning effects.
    • Moving heads or any lights capable of projecting shapes or designs work especially well in this setup.

4. Packing the RFSSB Facade

Step 1: Folding the Facade

• Bring In the Panels:
  • Once your event or gig is over, fold each panel inward for easy packing.

Step 2: Pack It into the Bag

• Use the Included Travel Bag:
  • Open the zipper of the travel bag and place the folded facade inside.
  • Ensure the corners are tucked in properly for a snug fit.
  • Velcro Straps: These help secure the facade in place within the bag.

Step 3: Close the Bag

• Zip Up the Bag:
  • Close the bag and use the handles for easy transport.
  • The bag has feet at the bottom to prevent slipping, making it easier to carry.

Conclusion

Setting up and packing the Rockville RFSSB Facade is straightforward, ensuring your event or gig looks professional with minimal effort. Whether you're shaping it for a traditional or jagged look or adding light for a dramatic effect, this facade offers versatility for any occasion.