ACC-B: How To Set Up & Use

Introduction: In this tutorial, we'll guide you through the easy process of setting up your Rockville ACCB T-Bar for your next gig or event. The T-Bar is designed to fit onto a 35mm speaker stand and provides a reliable and flexible way to mount your lights. Let’s get started!

Step-by-Step Instructions:

1. Unboxing Your ACCB T-Bar Kit

• Included Items:
  • T-Bar (available in black or standard finish)
  • Carrying Bag for easy transport
  • Hardware for mounting lights

2. Attaching the T-Bar to the Speaker Stand

• Loosen the Side Knob: Begin by loosening the knob located on the side of the T-Bar.
• Mount to the Speaker Stand:
  • Line up the bottom of the T-Bar with the top of your 35mm speaker stand.
  • Slide the T-Bar onto the stand and ensure it’s securely in place.
  • Tighten the Side Knob to lock the T-Bar onto the stand.

3. Expanding the Arms for Light Attachment

• Attach Each Arm:
  • Start with one arm at a time.
  • Remove the safety pin from the arm.
  • Pull the arm out to the desired position.
  • Reinsert the safety pin to lock the arm in place.
  • Repeat the same process for the second arm.

4. Attaching Your Lights to the T-Bar

• Using the Included Hardware:
  • Take the wing nut, washer, and screw from the hardware kit.
  • Insert the screw through the T-Bar arm's hole.
  • Place the washer onto the screw and insert the light bracket.
  • Use the wing nut to secure the light to the T-Bar.
• For Wedge Lights:
  • Remove the wing nut entirely if you’re using a wedge light.
  • Use a screw and washer to attach the light to the T-Bar.

5. Breaking Down the T-Bar

• Remove the Lights:
  • Loosen the wing nuts securing the lights.
  • Carefully remove the lights from the T-Bar, making sure not to lose any washers or screws.
  • Store the hardware on the screw to keep it organized.
• Lower the T-Bar Arms:
  • Remove the safety pin from each arm one at a time.
  • Carefully lower each arm and reinsert the safety pin to secure the arms.
• Remove the T-Bar from the Stand:
  • Loosen the side knob to detach the T-Bar from the speaker stand.

6. Storing the T-Bar

• Pack it Away:
  • Place the T-Bar and arms into the included carrying bag for easy storage and transport.

Conclusion:

Setting up and breaking down your Rockville ACCB T-Bar is quick and simple, making it perfect for your next performance or event. With its easy assembly and versatile mounting options, you can securely attach lights and enjoy seamless setup and takedown.