HP65S | HP65S-8: How To Mount

Introduction

The Rockville HP65S Black speakers are designed for easy wall mounting, whether on drywall or a studded wall. This guide will walk you through vertically or horizontally mounting your speakers, ensuring a secure and organized setup.

1. Tools & Materials Needed

✔ Drill with a 1/4-inch drill bit
✔ Screwdriver
✔ Level (optional for alignment)
✔ Stud Finder (if applicable)
✔ 1/4-inch screws and anchors (for drywall mounting)
✔ Hammer (to help push anchors in)
✔ Mounting bracket and screw knobs (included with speaker)

2. Determining the Mounting Location

✔ Use a stud finder to check if the wall has a stud behind it:

• If a stud is present, use screws only (no anchors required).
• If no stud is present, use anchors for support.
  ✔ For multiple speakers, ensure even spacing between them, typically 16 to 24 inches apart.
  ✔ Decide whether you want a vertical or horizontal setup before marking the placement.

3. Installing the Mounting Bracket

1. Position the bracket on the wall at the desired height.
   • Ensure it has the backward L shape when mounted correctly.
2. Mark the drill hole locations using a pencil or pen at the top line of the bracket.
   • If running speaker wires, use the center or top/bottom holes for cable management.
3. Drill pilot holes using a 1/4-inch drill bit at the marked points.
4. Insert wall anchors (if mounting on drywall).
   • Use a hammer if needed to push the anchors in fully.
5. Attach the bracket to the wall by aligning it with the drilled holes and securing it using screws with a drill or screwdriver.
6. Double-check the stability of the bracket before mounting the speaker.

4. Attaching the Speaker to the Bracket

1. Locate the mounting holes on the speaker (one on the top and one on the bottom).
2. Align the speaker's holes with the bracket's front mounting holes.
3. Insert the screw knobs through the bracket into the speaker.
4. Tighten the knobs securely but leave some flexibility if you need to adjust the speaker’s angle.
5. Adjust the speaker angle to direct sound at the optimal position.
6. Once positioned correctly, tighten the knobs completely to lock the speaker in place.

5. Mounting the Speaker Horizontally (Optional)

✔ The horizontal mounting process is the same as the vertical setup, except:

• Rotate the bracket sideways when marking the drill points.
• Follow the same drilling and installation steps to attach the bracket.
• Use the screw knobs to mount the speaker horizontally instead of vertically.

6. Installing Additional Speakers

✔ Follow the same steps to mount multiple speakers, maintaining equal spacing for balanced sound.

Conclusion

Now your Rockville HP65S Black speakers are securely mounted, whether vertically or horizontally! This guide ensures a safe and stable installation while keeping your setup organized.