RDR3U: How To Set Up In A Studio Desk

Introduction

The Rockville RDR3U Rack Drawer is designed to fit into studio desks with a 3U rack space, providing a secure and convenient storage solution. This guide will walk you through the step-by-step installation process, ensuring a proper fit and secure mounting of the drawer.

What You’ll Need

Before getting started, ensure you have the following:

• Rockville RDR3U Rack Drawer
• Studio desk with a 3U rack space
• M6 Cage Nuts (required for installation)
• M6 Screws (available at hardware stores or online)
• Pliers (for inserting cage nuts)
• Flathead Screwdriver (optional for securing cage nuts)
• Phillips Head Screwdriver (for tightening screws)

Step-by-Step Installation

1. Check for 3U Rack Space

Before installing the drawer, confirm that your studio desk rack has enough space for a 3U unit:

1. Locate the mounting holes on your studio desk’s rack.
2. Count the blank spaces between the holes to determine the size:
   • 1U = One blank space between screw holes.
   • 2U = Two blank spaces between screw holes.
   • 3U = Three blank spaces between screw holes.
3. If you count three blank spaces, your rack is compatible with the Rockville RDR3U drawer.

2. Install the M6 Cage Nuts

1. Take an M6 cage nut and locate the lips on the sides.
2. Use pliers to squeeze the lips slightly for easier installation.
3. Insert one side of the cage nut into the hole and push it in until it clicks into place.
4. Alternatively, use a flathead screwdriver to secure the other side of the nut into the hole.
5. Repeat for all four mounting points where the drawer will be attached.

3. Insert the Rack Drawer

1. Lock the drawer using the included key before inserting it—this prevents it from sliding open during installation.
2. Align the rack ears of the drawer with the installed M6 cage nuts.
3. Carefully slide the drawer into the rack space of your studio desk.
   • If your desk rack has a slight slant, keep this in mind when positioning the drawer.
4. Ensure that the mounting holes on the drawer’s rack ears align perfectly with the installed cage nuts.

4. Secure the Drawer

1. Take four M6 screws and insert them into the aligned holes on the rack ears.
2. Use a Phillips head screwdriver to tighten the screws and secure the drawer in place.
3. Ensure the drawer is firmly mounted and doesn’t move.

5. Unlock and Use the Drawer

1. Use the key to unlock the drawer.
2. Pull out the drawer and place your items inside.
3. When not in use, lock the drawer for security.

Removing the Drawer

If you need to remove the drawer:

1. Unscrew the four mounting screws.
2. Carefully slide the drawer out of the rack space.
3. Store it safely or transfer it to another rack.

Conclusion

Installing the Rockville RDR3U Rack Drawer in your studio desk is quick and easy. Ensuring the correct 3U space, proper cage nut installation, and secure mounting will provide a stable and functional storage solution for your setup.